The CJ3A Page CJ3B.info

Author Topic: Help! 51 CJ3A  (Read 109226 times)

0 Members and 1 Guest are viewing this topic.

Offline CJPilot

  • Flatfender Enthusiast
  • ***
  • Posts: 177
  • Karma: +0/-0
  • Shade Tree Mechanic
    • View Profile
Re: Help! 51 CJ3A
« Reply #105 on: April 02, 2015, 09:35:45 PM »

[size=12]

Has it been confirmed that the valve timing is correct, i.e. the timing dots lined up?

Another thought I had.  This is a geared engine so once you think you have found TDC you can check the timing marks on the front of the timing cover with the lower pulley.   They should be aligned when #1 is at TDC.  But be aware they will also be aligned when the #4 cylinder is at TDC.  That is why you need to feel the compression.

[/size]



Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #106 on: April 02, 2015, 09:57:41 PM »
Those wires seem pretty think and they worked before I blew the motor. I will try the timing again hawk and let you know asap. Pics coming soon

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #107 on: April 02, 2015, 10:20:23 PM »
Pics

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #108 on: April 02, 2015, 10:23:25 PM »
 Pic

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #109 on: April 02, 2015, 10:24:22 PM »
pic

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #110 on: April 02, 2015, 10:25:04 PM »
pic

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #111 on: April 02, 2015, 10:26:15 PM »
pic

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #112 on: April 02, 2015, 10:26:57 PM »
pic

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #113 on: April 02, 2015, 10:27:41 PM »
pic

Offline CJPilot

  • Flatfender Enthusiast
  • ***
  • Posts: 177
  • Karma: +0/-0
  • Shade Tree Mechanic
    • View Profile
Re: Help! 51 CJ3A
« Reply #114 on: April 02, 2015, 10:59:48 PM »
[size=12]I was looking for a picture that showed the plug wires from the distributor to the plugs.  That way we could see if the firing order was right. Your pictures don't show that.

And your right those battery wires do look like big wires.  I can't tell by the pictures what size your wires are, I'm just guessing. A 6v system draws twice the current a 12v system does for the same amount of work.  If your wires are not properly sized they will heat up and when they do they don't conduct as well and they get even warmer.  They work just not very well. Not a good situation when you are trying to start a cranky engine. 

Your distributor is not in the "normal" clock position. Normally the clips are at the 3 and 9 o'clock position and the wire terminal is up.

The "normal" clock position for the #1 plug wire is the 5 o'clock position.

[/size]



Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #115 on: April 02, 2015, 11:10:14 PM »
I'll give the timing another go tomorrow and try shat you said. dumb question but....TDC stands for?

Offline SSG T

  • Flatfender Enthusiast
  • ***
  • Posts: 151
  • Karma: +0/-0
  • Hooah
    • View Profile
Re: Help! 51 CJ3A
« Reply #116 on: April 02, 2015, 11:11:15 PM »
Here I go again skipping around... Still don't have the fuel pump working

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: Help! 51 CJ3A
« Reply #117 on: April 02, 2015, 11:13:05 PM »
Top� Dead� Center....TDC

It means that the #1 piston is at the very top of it's compression stroke.....ignition timing is set 5� before TDC to provide spark as the piston arrives at TDC

And both the intake and exhaust valves are fully closed for the full compression stroke...


https://www.youtube.com/watch?v=Gvleh-Xt2VU
« Last Edit: April 02, 2015, 11:16:49 PM by 1955CJ-5 »
1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline CJPilot

  • Flatfender Enthusiast
  • ***
  • Posts: 177
  • Karma: +0/-0
  • Shade Tree Mechanic
    • View Profile
Re: Help! 51 CJ3A
« Reply #118 on: April 02, 2015, 11:21:51 PM »
[size=12]Why would you dump a bunch to fuel into the engine before the ignition timing was straightened out?

I might add that the timing does not have to be in the �normal� clock position in order to run correctly.  It just helps   to make sense of everything.[/size]
« Last Edit: April 03, 2015, 07:06:05 AM by CJPilot »

Offline CJPilot

  • Flatfender Enthusiast
  • ***
  • Posts: 177
  • Karma: +0/-0
  • Shade Tree Mechanic
    • View Profile
Re: Help! 51 CJ3A
« Reply #119 on: April 03, 2015, 07:27:11 AM »
[size=12]Firing order at the distributor.  And shown in the "normal" position[/size]