While a lot of people tend to militarize their civilian jeeps, it seems I am headed in the other direction. So much of the original hardware is missing from this M38 - and while it's a shame not to replace it all, this thing is such a beater that I can't justify throwing the big bucks for original gear when it is possible the frame could break in half at any minute.
The Solex carb has been discarded as it - even with a new fuel regulator - would do nothing but dump tremendous amounts of fuel into the intake manifold. Sooty plugs, horrible burning fuel smell, off it came. I ordered a rebuilt Carter 636 from scoutpilot. It hasn't even arrived yet but in seeing it in the test video he sent me I decided it looks too pretty for the M38 and will go on my 3A instead.
Today, I transplanted the existing Carter from my 3A to the M38. I've done remarkably well not scavenging parts from the 3A, tempting as it is, but I have recently decided if I need a nice new part it should go to the 3A and the hand-me-downs will go to the M38. Now, with the purchase of one part it's like I upgrade 2(!) jeeps. That's like half-price parts, right???
I have also decided it's helpful having two jeeps with the same parts so I can swap them out to help troubleshoot specific problems before blindly buying new parts. I have determined the M38's distributor is in fact junk and I stole the one from my 3A. The 3A, in turn, will get a nice new one.
Fuel tank has been cleaned, repaired, and treated with some sort of magical liner. All new fuel lines installed.
Crusty air cleaner as purchased from Tom here on the 3A page has been installed and is working great. I didn't even bother to paint it as it looks better "as-is".
Rotted muffler was cut off and replaced. It is currently mounted with wire coat hangers but I will improve that arrangement, maybe.
New plugs, wires, dist cap, condenser, and it really runs good now. Temp gauge is working and reads right were it should. I changed the oil again with less than an hour of run time and it was as black as oil gets - pretty gross. I'm hoping the upgrade in carburetors and just flushing the oil a couple times will clean up the engine a little bit.
Next up will have to be the steering. This rig is scary to drive as any hint of a bump sends it into the throes of a death wobble.





