I have not named a Jeep before, but thought it might be fun with this one. This '3A lived some of its known life near Hoover Camp in Virginia. (the president's mountain get-away)
Approx 10-12 years ago, a neighbor up the road from me,� stopped and asked if I would be interested in an old Jeep he had. It was previously owned by his deceased great uncle, and nobody else in the family wanted it when he died. This neighbor kept it for 5 years, thinking he might bring it back to life, but decided he would never do anything with it.
The price was good, he gave it to me for free I was not sure what I was going to do with it, but it seemed complete, although rusty and banged up. I moved it to my parents' property (my wife did not want another Jeep setting around, haha)
Fast forward to a couple years ago. . With the kids out of the house, and a little more time, my interest in Jeeps started coming back. I joined "theCJ2Apage" and really got interested. Unfortunately, I got extremely busy at work, and it took until now to finally bring the '3A home and start working on it. Part of that delay also had to do with fact that Hoover did not come with a title. I learned that VA DMV has a "abandoned vehicle" process, and thru this I was able to get a title!
My plans are to make this more of a "preservation" than a "restoration". My '2A is a working/trail Jeep, and I like that "old" feel. This one will stay stock, keeping as many of the original parts as possible. (and removing all of the modifications) to confess before I begin - > I am an amatuer, so the bodywork etc. may not be done using best methods. I learn as I go.
The first 4 photos show Hoover in hibernation, I took these photos on one of my visits to my parents', when I was contemplating bringing it back to life.
The first photo shows the snow plow frame, and massive wooden bumper. I am not sure how this Jeep was used, but it sure has a lot of body damage from running into things.
The original color shows in many places, there is a fairly big patch of the tan under the hood in this photo.

A rear view, showing one of the many pop-riveted patches. When I first looked at this, I wondered why someone would replace the taillight with a reflector, but apparently this is how they came from factory.


I need to find that flip-out vent some day. Tires on front have no tread.

The front tires are shot, but this one looks almost brand new. Anyone have 3 Cooper Super Tractions they want to sell?


On the trailer headed home . . early October


In our driveway . . let the work begin. . . about the only things I have done at this point are remove the junk, and wrap some electrical tape around the steering wheel, to keep my hands from get black everytime I touch it. (I will have to find restoration threads on that later)

The wheelhouse has pulled away from quarterpanel, and is badly dented.

A view of quarterpanel, with the pop-riveted patch removed.� �I plan to replace some of this, just too badly dented for me to try to straighten.

A photo after I cut off the plow frame (it was welded to frame in some places, the bumper is welded also.

what the heck were they doing with this thing to get it so dented up?


The floors and hat channels are shot.

.

I decided to start with the rear . . had to straighten the frame member to provide something to bolt to.Some dents to pound out of rear quarter. A closer view of that new looking tire. I am starting to experiment with paint, to get something close to original tan. Body is too yellow, but the wheel is starting to get close. Springs are in decent shape.

.
After removing the tailgate surround piece.

.

.
The lower portion of the surround was badly dented and rusted,� so I made a new one out of some channel I had in my scrap bin. It was same gauge, and already had the 90 degree bend.

.
