The CJ3A Page CJ3B.info

Author Topic: My belated birthday present to myself  (Read 29185 times)

0 Members and 1 Guest are viewing this topic.

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
My belated birthday present to myself
« on: January 10, 2013, 04:31:24 PM »
Tomorrow, my dad and I are flying out to John's (duffer) to get my belated Birthday present. It is a 1918 IHC Titan 10-20. 10HP at the drawbar, 20HP at the belt pulley. We're going to make a side trip and go snowmobiling in Yellowstone.

From the pictures John sent me, it looks to have a lot of original paint. I can see some original red and pin striping on the rear wheels. It still even has all 4 hub caps that always fall off! I sent the pictures to a friend that has two, and he said that this one looks to be used mostly for belt work and very little to no plowing of fields. He also said it is one of the best ones he has seen. I'm real excited to pick it up and meet John!

On the front of the water tank, you can make out the old IHC logo decal. Looks like the picture at the end.














Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline F Bill

  • Flatfender Master
  • *****
  • Posts: 1402
  • Karma: +1/-0
    • View Profile
Re: My belated birthday present to myself
« Reply #1 on: January 10, 2013, 05:24:47 PM »
How the heck are ya gonna fit that in your luggage?

Is it large enough to need escorts?

Congrats Nate, looks like it will be a bunch of fun. I can't wait for the videos.
Owner of the world famous?? Pintojeep 3A and one yet to be named stock project 3A.
Based in central TX and upstate NY.

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: My belated birthday present to myself
« Reply #2 on: January 10, 2013, 05:35:08 PM »
Haha Bill, we are renting a Uhaul and going to shove it in the back to haul it home.

There will be lots of videos and pictures of it.  :)
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: My belated birthday present to myself
« Reply #3 on: January 11, 2013, 08:10:43 AM »
Quote
There will be lots of videos and pictures of it. �:)
Great. Looking forward to seeing them.
I'm an old Iowa farm boy so tractors interest me greatly.
If I could get out of this big city, I'd probably start collecting tractors too. I'm sure my wife would be thrilled.  ;D
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline gmcjr

  • Flatfender Enthusiast
  • ***
  • Posts: 168
  • Karma: +0/-0
  • Even a blind hog finds a acorn every now and then.
    • View Profile
Re: My belated birthday present to myself
« Reply #4 on: January 11, 2013, 02:04:18 PM »
You know, it could come in handy, just in case  the jeep gets stuck. ;D
Gary in N. Texas
51 CJ-3A (old Trusty)
52 Ford 8n (ugly duckling)
46Farmall B (old Rusty)
18 Wrangler Jk

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: My belated birthday present to myself
« Reply #5 on: January 12, 2013, 04:42:36 PM »
Oh Man, you have a project on your hands now!!  I used to do tractors, mine were 40s and 50s vintage and I can tell you that those components are a lot lighter than the ones you'll be dealing with!!!  An those wore me out !!!!  Good luck, I'm looking forward to joining you on this journey, from my easy chair of course!!!!
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: My belated birthday present to myself
« Reply #6 on: January 16, 2013, 08:45:54 PM »
Phew! Made it back today safe and sound.

Here she is at John's when I first saw it.









It fit in the back of the truck with an inch to spare!

Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: My belated birthday present to myself
« Reply #7 on: January 17, 2013, 07:22:12 PM »
Some pics of loading.













Some pictures of unloading today.









And I started wrenching on it too. First thing was my dad and I jacked up all 4 wheels and put ATF in the grease cups. The bearings are good and tight which is real rare on these. They used a half *rear end roller bearing.

And then I popped the rear cover off. I was very worried about a bent rod or something horrific in there. Nothing wrong at all! Don't be fooled by the pics, the crank is close to 2" in diameter. The pistons are 6" in diameter or so.





And then I drained the goop out of the transmission. If you worked on a farm fresh jeep, you know what this stuff is. It is found in the transmission, transfer case and differentials.



The original shipping information on the starting flywheel

Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: My belated birthday present to myself
« Reply #8 on: January 18, 2013, 11:34:55 AM »
That's a very cool tractor. I was thinking it was a lot larger when only the first photos were posted.
Bob W

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: My belated birthday present to myself
« Reply #9 on: January 19, 2013, 08:11:19 AM »
Got the head off the Titan yesterday. One cylinder is perfect. The other had an open valve, so there is rust in there. It is not bad though. Jut minor surface rust. A wire wheeling and a light honing should clean it up nicely. The valve and valve seat are not bad too. When it was put away, someone plugged up the fuel hole in the carb and made sure the throttle and choke were closed. That's probably what saved it.







Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: My belated birthday present to myself
« Reply #10 on: January 22, 2013, 11:48:39 AM »
Here are some cool videos of the Titan.
That would be a real hoot to own and run.

Starting
http://www.youtube.com/watch?v=Ahw68RWRaDQ

Running
http://www.youtube.com/watch?v=WuL7KR1lmWw

Starting and driving
http://www.youtube.com/watch?v=ytyJK6yJdFg
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline 3aJeeper

  • Flatfender Enthusiast
  • ***
  • Posts: 143
  • Karma: +0/-0
  • Luvs me a flatfender Jeep!
    • View Profile
Re: My belated birthday present to myself
« Reply #11 on: January 22, 2013, 06:59:07 PM »
What a great project....you are going to have a fantastic time putting that together and getting it running. Looking forward to watching the progress!  :D
1951 CJ3a
F-134 Hurricane engine

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: My belated birthday present to myself
« Reply #12 on: January 28, 2013, 08:52:07 PM »
I got the pistons out finally. The rusted up one put up more of a fight. A porto-power here and a hammer there, it came free. I thought you guys would like the engine specs too, 20HP @ 500 RPM, bore: 6.5", stroke: 8", displacement, 531 cubic inches.



These pistons are in perfect shape. The ring grooves are still nice and square unlike the other set. The grooves on the other set are V shaped which is bad because the rings can't seal to the piston. I'll get some new ones though. These rings and pistons tell me this tractor had very little use. They usually look like that junk top ring.



And the rings. The top one came off a spare piston. The lower one is how all the rings looked on the pistons I took out. They still have some life left to them unlike the other.

Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: My belated birthday present to myself
« Reply #13 on: January 29, 2013, 07:06:13 PM »
Quote
displacement, 531 cubic inches.

Wow �:o , that's 4 times what our Jeeps have �;D
Bob W

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: My belated birthday present to myself
« Reply #14 on: January 30, 2013, 05:52:23 AM »
Oh yeah, everything is big on this bad boy.

Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted