scene my last post i was able to make pressure. i had the gear off the pump, and turned it with a drill took 30 seconds or longer to make pressure, out the pump back in, and no psi. the pump was dry.
i made a tool a 5/8th fine thread bolt to go in place on the over pressure cap, with a 1/8" hole to use a hand pump oil can to put oil in to the pump, and still notta.
the oil pan is down, and i heated up the oil pick up, as per a tip i got the other day. oil sticks to the screen, and cloggs it. so the pump can't suck up any oil. and why when using the drill it had the delay before i had pressure..... so i had 2 table spoons of a tar like substance drain out, and a lot of smoke ! once the pan is up, and i hit the key i'll let ya know how it went.
fyi i started this in jan , might sell or trade it soon ? if i can't get pressure
