Foot starter linkage

[Kenny_Kustom]

Could someone post a pic of how the foot starter rod is supposed to attach to the starter/linkage?

[1955CJ-5]

Nate posted this picture on a thread that i started....

http://cj3apage.com/forum-yabb/YaBB.pl?num=1362803414/15

[garage gnome]

Yep, that would be how it goes. Your push rod comes down and out of the body and connects to the drive engagement lever.

[Kenny_Kustom]

Not what I wanted to hear.  

Mine has a rod through the firewall, down to a linkage that runs on top of the trans, over to another lever that pushes on the starter.

[Kenny_Kustom]

So... Where is it supposed to come through the firewall ?

Right beside my hole, where that spot has been patched ?

[Bob W]

Someone has tried to adapt the utility vehicle type linkage onto your CJ-3A. On a stock CJ-3A the pushrod pedal attaches directly to the starter.

[garage gnome]

Mine is right near the bottom of the parking brake brace that you can see in your picture. Looks like bubba did something to yours. I know there is a later version of this linkage. I'm not sure what it looks like.

[garage gnome]

Bob posted the same time I did. He is right. Disregard what I said about the other version.

[1955CJ-5]

Not what I wanted to hear. �>

Mine has a rod through the firewall, down to a linkage that runs on top of the trans, over to another lever that pushes on the starter.

Here is a picture of mine..needs a little work!




How do you post those large pictures??

Randy

[garage gnome]

Are you using photobucket? It looks like you are using the thumbnail links instead of the regular img links.