I don't have a link, but I may be able to walk you through it and get you close. The first step is to make sure your components are in good shape, worm drive, drag link, bell crank and tie rod ends need to be in good order or this will probably not help you much.
I raised the front end when I did mine, there is a high spot on the worm drive that is the center of the steering gear; make sure the steering wheel is centered on that high spot as that is the first alignment point. If you crank in the tensioner bolt on the worm drive you can feel the high spot when you turn the wheel.
Now take a solid string, I hooked mine on the rear leaf spring and wrapped it across the rear tire as close to center as you can get, run it all the way to the front. The string should touch the rear of the rear tire, the front of the rear tire and the rear of the front tire at the same time, you should have 1/8th inch toe in on the front edge of the front tire at that point, if not you need to adjust the toe in by cranking on the adjuster rods on the front. Go slow as just alittle adjustment makes a big difference. Hope that helps, I know some other guys will chime in here too, thats cool.
Todd