The CJ3A Page CJ3B.info

Author Topic: Vaccum powered Wipers  (Read 9467 times)

0 Members and 1 Guest are viewing this topic.

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Vaccum powered Wipers
« on: April 06, 2011, 04:56:18 PM »
I have a CJ3A with a GPW flat head L134. �Currently, the vaccum wiper gets its power from a hose that is attached to the manifold.

Is this right? �

This is all coming to light because I want to install a mechanical fuel pump. �(Prior owner installed an electric fuel pump which causes the jeep to run rich.) �It seems there are fuel pumps available with and without vaccums for the wipers.

I only have one wiper motor on the driver side. �It doesn't look like a second wiper motor was ever installed on the passenger side.

In 1949, was it an option to have the passenger side wiper?

The existing wiper motor seems under powered. �Is this common with vaccum wiper motors?

2-1949 CJ3As
1-1946 CJ2A

Offline Matto

  • Willys Guru
  • ****
  • Posts: 361
  • Karma: +0/-0
    • View Profile
Re: Vaccum powered Wipers
« Reply #1 on: April 06, 2011, 07:33:29 PM »
Your jeep originaly came with a combination fuel/vacuum pump which powered the wiper. I have seen both single and dual wiper setups on these Jeeps. I'm not sure if the dual setup is an original option or not. My 49 has a wiper moter on drivers side and a hand powered wiper on the passenger side. Gave the passenger something to do on rainy days.
 :)
1949 CJ3A project,1954 CJ3B weekend driver,2012 JK Rubicon DD and weekend trail rig,2016 Ford F350 for dragging cool stuff home :)

Offline rocketeer

  • Flatfender Master
  • *****
  • Posts: 1328
  • Karma: +0/-0
  • Support Our Troops.
    • View Profile
Re: Vaccum powered Wipers
« Reply #2 on: April 06, 2011, 08:27:39 PM »
The CJ3A should have, as mentioned, a dual action, fuel/vacuum, pump. Keep in mind that if you install a dual action pump on your 3A, you will also need to install a spacer between the pump and block. Bob W has some additional info on his website.

http://www.cj3a.info/tech/fuelpump.html

Larry

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Vaccum powered Wipers
« Reply #3 on: April 07, 2011, 03:50:29 PM »
I appreciate the responses.  I think I need to add a hand wiper to the passenger side.

On the Vacuum, this is a 1945 GPW L134 Motor vs. a true CJ3A motor.  Do the same rules apply regarding the fuel pump and wipers?
2-1949 CJ3As
1-1946 CJ2A

Offline rocketeer

  • Flatfender Master
  • *****
  • Posts: 1328
  • Karma: +0/-0
  • Support Our Troops.
    • View Profile
Re: Vaccum powered Wipers
« Reply #4 on: April 07, 2011, 06:27:46 PM »
Yes.

I'm sure someone has already mentioned this but there are GPW guys over on the G503 forum who would undoubtedly make you a heckuva deal for your GPW engine. Might even swap a CJ engine plus some cash for it.

Larry

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Vaccum powered Wipers
« Reply #5 on: April 08, 2011, 12:26:26 PM »
So Larry,  to be somewhat accurate,  I get the duel fuel/vacuum pump, run the wiper motor with the fuel pump, then just plug the hole in the manifold? Right?

Best place for a good repo pump?  I'm not overly concerned about absolute accuracy, as this Willys is a CJ, soon to be dressed like an M38, with a GPW motor.  The thing is all over the place.  Not ever going to win awards, but will be a kick in the pants, summer driver.

I would hate to trade motors.   Knowing what I have vs. what I might get is a bit un-nerving.  This GPW is tight as a bugs butt and runs very strong.  (aside from running too fuel rich)  I guess I could toss the idea out there and see what might be.

Thanks,

Tim  
2-1949 CJ3As
1-1946 CJ2A

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Vaccum powered Wipers
« Reply #6 on: April 08, 2011, 06:24:35 PM »
The fuel pump is only a vacuum booster. The wipers normally run on manifold vacuum. The manifold fitting is connected to the fuel pump vacuum booster and the booster is connected to the wiper motor.
Bob W

Offline rocketeer

  • Flatfender Master
  • *****
  • Posts: 1328
  • Karma: +0/-0
  • Support Our Troops.
    • View Profile
Re: Vaccum powered Wipers
« Reply #7 on: April 09, 2011, 11:04:14 AM »
I know we had a thread on this on the old forum but I can't find it. Maybe someone else can search. I remember we had several pics posted showing how the vacuum lines ran.

Larry

Offline Matto

  • Willys Guru
  • ****
  • Posts: 361
  • Karma: +0/-0
    • View Profile
Re: Vaccum powered Wipers
« Reply #8 on: April 09, 2011, 10:05:15 PM »
1949 CJ3A project,1954 CJ3B weekend driver,2012 JK Rubicon DD and weekend trail rig,2016 Ford F350 for dragging cool stuff home :)

Offline rocketeer

  • Flatfender Master
  • *****
  • Posts: 1328
  • Karma: +0/-0
  • Support Our Troops.
    • View Profile
Re: Vaccum powered Wipers
« Reply #9 on: April 10, 2011, 09:57:47 AM »
That be the one!  :)

Larry

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Vaccum powered Wipers
« Reply #10 on: April 11, 2011, 04:35:48 PM »
Thanks Matto. �Thanks Larry. �I copied/pasted that link for future reference. �That will be incredibly helpful. �One final question in this post::

I see these things everywhere, but I'm a guy that like to put my hands on something I purchase, or have it on good authority that I won't get screwed over by a cheap vendor. �

Best place to get a quality fuel/vacuum pump without breaking the bank?

By the way, from this forums recommendations, I bought a WIRE HARNESS from Walcks. �It is one of the most beautiful things I have ever seen. I can't wait to install it.
2-1949 CJ3As
1-1946 CJ2A

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Vaccum powered Wipers
« Reply #11 on: April 11, 2011, 07:37:56 PM »
I have purchased a couple CJ-3A fuel/vacuum pumps from Walcks and they work good. They also have the necessary spacer too.
Bob W

Offline rocketeer

  • Flatfender Master
  • *****
  • Posts: 1328
  • Karma: +0/-0
  • Support Our Troops.
    • View Profile
Re: Vaccum powered Wipers
« Reply #12 on: April 12, 2011, 09:07:16 AM »
I'll second Walcks.

Larry

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Vaccum powered Wipers
« Reply #13 on: April 20, 2011, 08:31:47 PM »
I hate to bring this subject up again, but as I started to clean and prep the chassis for repairs, seals, paint etc, I noticed my motor mounts are a bit saggy, allowing the engine to point down. �(1945 GPW engine) So, I intend on replacing the mounts.

I got a good look at the fuel pump mounting position. �The front motor plate where the motor mounts are attached, bends BACK toward the fuel pump location. I don't think a Vacuum/fuel pump will fit.

I have read that the frame brackets were not offset in earlier jeeps. �Mine is a 3A frame with offset mounts and this was done to accomodate a Vacuum/fuel pump.

Was the frame in WWII Willys jeeps more narrow than the 3A?
There is a hexigon shaped brass or bronse spacer/mounting block attached to the motor mount which is attached to the frame. (Driver side only) �This spacer looks like a real manufactured part. It looks cast. �Not some fabrication job. �

 With the motor front plate bending back, am I going to have to use a smaller NON vacuum mechanical fuel pump? �

If it kills me, I am going to try to figure out how to add a picture to this. �Stay Tuned.
2-1949 CJ3As
1-1946 CJ2A

Offline rocketeer

  • Flatfender Master
  • *****
  • Posts: 1328
  • Karma: +0/-0
  • Support Our Troops.
    • View Profile
Re: Vaccum powered Wipers
« Reply #14 on: April 20, 2011, 09:02:39 PM »
There was an adaptor made to allow a 3A front engine plate to be used on a 2A frame to allow the room needed for the combo fuel pump. It sounds like someone used that adaptor to do just the opposite and adapt an early plate to fit a 3A frame. The easy way to fix that is to get a 3A front engine plate and do away with the adaptor thereby allowing room for the combo pump.

Here's some more info:

http://cj3apage.proboards.com/index.cgi?action=display&board=Tech&thread=1506&page=1

Larry