The CJ3A Page CJ3B.info

Author Topic: The Superior CJ-3A trait  (Read 21948 times)

0 Members and 1 Guest are viewing this topic.

Offline oldtime

  • Willys Guru
  • ****
  • Posts: 234
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
The Superior CJ-3A trait
« on: October 24, 2014, 06:19:55 PM »
In truth no one particular jeep is "THE BEST".

We all understand that "BEST" is a relative term.
This implies that a jeep or jeep model can only be considered as "best" when it is compared to the task at hand.
And time changes the need.
This is not the 1940's, 1950's nor 1960's anymore.

So I ask you all what is it that the CJ-3A continues to excel at that no other Universal model can claim ?

There exists 1 very important advantage of the CJ-3A as compared to all other Jeep  models that are designated as the " THE UNIVERSALS".

In fact then it is this same "UNIVERSAL" designation that allows the CJ-3A to excel above the rest.

Your turn........


Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: The Superior CJ-3A trait
« Reply #1 on: October 25, 2014, 10:51:55 AM »
There are some obvious advantages the 3A has over the 2A,  MB, GPW.   Visibility, driving comfort, frame strength, etc� 

I don�t have a 3B, so I�m not sure there is a weakness that would tilt a �thumbs up� back to the 3A.

The primary change from 3A to 3B is the engine, thus the need for the high hood.  I see the Hurricane engine as an advantage for the 3B, so perhaps the high hood causes a disadvantage�

Maybe in visibility?

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline oldtime

  • Willys Guru
  • ****
  • Posts: 234
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: The Superior CJ-3A trait
« Reply #2 on: October 25, 2014, 12:42:01 PM »
Tim, in my experience that is absolutely correct.
The high hood design decreases offroad visability.
So basically here we are delving into the low hood vs high hood body debate.
More on that later...

The CJ universal was in a constant state of change that we generally call progression.�
And most of those changes are in fact a progression toward a better design.
But some few changes to the universal were apparently influenced by cost cutting incentives.
I expect that the 1957 change from individual instrumentation toward cluster instrumentation was such an example.

The 1953 body change from low hood to high hood was not determined from cost cut incentive.
It was clearly mandated due to the excessively tall inline 4 cylinder F-head design.

It seems strange to me that the CJ-3A should ever have existed.
The original CJ-2A universal was a low hood and reasoning questions why was it ever re-designated to become model CJ-3A ?
The body designs between 2A and 3A are nearly identicle until you look hard at the details.
The windshield being the most obvious change.
Did that alone warrant a change of model designation ?

After all a 1955 Chevy Bel-Air and a 1957 Chevy Bel-Air are technically the same models but having a vastly different appearance.

So what was Willys thinking when they decided to change from 2A to 3A ?
The mechanical upgrades from 2A through 3A were relatively few and were not vastly significant.

Regardless of the model re-designation reasoning;
it stands that the model CJ-3A remains to-date as the most advanced production universal jeep design having the low hood advantage.
Add that the 3A windshield provides better visibility than the 2A design.
And this fact remain to date as the 3A's superior niche for all time to follow.
No production universal jeep body prior to or since the CJ-3A can rightfully claim to yield superior visability.

So I ask you....
Excepting the "high hood" reasoning why would one ever want to change away from the CJ-3A body design ?
I see no true progression beyond the 3A form ever put into production.

More� to follow.
Thanks for your comments !






« Last Edit: October 25, 2014, 12:44:55 PM by oldtime »

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: The Superior CJ-3A trait
« Reply #3 on: October 25, 2014, 06:40:02 PM »
The CJ certainly was a progression.

There are actually a few small differences, or improvements, in CJ-3A body vs the CJ-2A body - other than the windshield frame. Stuff like more space for the driver and a gutter around the tool box lid.

The CJ-3B had one huge improvement - 12 more horsepower makes a BIG difference. But the hood, I just can't get past that. For me X98 was perfect. A flat fender CJ with 72 HP AND good looks.
Bob W

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: The Superior CJ-3A trait
« Reply #4 on: October 25, 2014, 06:44:05 PM »
Quote
It seems strange to me that the CJ-3A should ever have existed.

Marketing. Would you rather have a CJ-3A or a CJ-2B?
 ;D

3 is better than 2!
Bob W

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: The Superior CJ-3A trait
« Reply #5 on: October 25, 2014, 08:51:51 PM »
I agree with the marketing idea. The 2a had been around for several years so it was time for a "new" number...

But for me, at 6' 1", the 3a's leg room made a difference.

The visibility is hugely better(I sit higher) than my CJ-5, and the 3a seems lighter and more maneuverable than the -5. It just seems that you can "toss" it around more easily, sort of a sports car for off-road.

When I drive the -5 it just seems heavy and sluggish compared to the 3a....but, it is more comfortable and "smoother" if that term can be applied to a jeep....
1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline oldtime

  • Willys Guru
  • ****
  • Posts: 234
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: The Superior CJ-3A trait
« Reply #6 on: October 27, 2014, 08:52:50 PM »
Hey Bob W, It's been a really long while since we chatted.
Yeah I must agree the CJ-2 vs. CJ-3 switch seems like some kind of marketing ploy.
I never did get to read your 3A book ....

1955CJ-5, now that's certainly another interesting comparison CJ-3A vs CJ-5.
FYI... the CJ-5, 6 did get a taller arched windshield glass for the 1969 - 1975 vintages.

Quote
For me X98 was perfect. A flat fender CJ with 72 HP AND good looks.

Previously we were comparing plusses and minuses concerning various production CJ's.
I'm not fully convinced that the X 98 was a thing of beauty.
Never the less my personal CJ interest is solely functional and not the aesthetic form.
The X98 does appear to have a strong hood shape.
I only find a single example of a non production or prototype CJ that is more functionally advanced than the CJ-3A body type.
 
It sits over here: http://cj3b.info/Photos/Proto/Willys141041Left.jpg

Warning !!! We certainly must restrain from declaring the 3B modified "SLOPE HOOD" as being aesthetically pleasing.

The "Slope Hood" does provide identical ground view as the "Low Hood" CJ's.
The Slope Hood design allows for more engine compartment modifications than a Low Hood.
Finally it has an added benefit almost resembling the word "aerodynamic".�

Of the production vehicles I find the CJ-3A to be the most advanced body form.
I find the Slope Hood 3B to be the best universal body form if we include the various prototype forms.

I'm 5'-7-1/2".
So most all CJ's fit me pretty well.
Some will fit / function better than others.

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: The Superior CJ-3A trait
« Reply #7 on: October 27, 2014, 09:51:36 PM »
Quote
It sits over here: http://cj3b.info/Photos/Proto/Willys141041Left.jpg

To me it looks like it just got hit really hard in the front end...

"aerodynamic" and "jeep" are antonyms.

1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: The Superior CJ-3A trait
« Reply #8 on: October 27, 2014, 10:43:21 PM »
Bob W mentioned the X98.  I didn't know what it was, so I did a quick search. Just in case there are others that are in the dark with me,  below is some very informative info about a number of Willys Jeeps that never were to be. 

http://cj3b.info/CJ4Prototypes.html

I do like the X98, but I think I like the CJ-4M a little better.  After all, the fenders are still technically flat.  ;)

The prototype "CJ-3B" that OldTime shows us just looks wrong.   I can see why it was quickly rejected. 

Anyway, great thread.

Tim


2-1949 CJ3As
1-1946 CJ2A

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: The Superior CJ-3A trait
« Reply #9 on: October 28, 2014, 08:45:12 AM »
Quote
So I ask you....
Excepting the "high hood" reasoning why would one ever want to change away from the CJ-3A body design ?
I see no true progression beyond the 3A form ever put into production.
I think the M-38 body was superior to the CJ-3A. The removable floor pans are really nice. The M-38 canvas enclosure is light years ahead of the CJ-3A seven piece top. And then there is a larger fuel tank. Other stuff like threaded transfer case shift pivot pin, indexed drive shaft slip joints, etc, etc. all fall under mechanical rather than body. The only downfall of the M-38 was the extra couple hundred pounds of weight was just too much for the little Go-Devil engine.
Bob W

Offline oldtime

  • Willys Guru
  • ****
  • Posts: 234
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: The Superior CJ-3A trait
« Reply #10 on: November 08, 2014, 12:13:10 PM »
Quote
I think the M-38 body was superior to the CJ-3A.
So that  brings us to the topic of CJ-3A body vs M38 body.
Besides the transmission tunnel and the larger fuel tank opening;
Are there any other notable differences between the M38 and 3A bodies ?

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: The Superior CJ-3A trait
« Reply #11 on: November 08, 2014, 01:22:18 PM »
Tailgate mounted spare and gas can...
1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: The Superior CJ-3A trait
« Reply #12 on: November 08, 2014, 06:43:54 PM »
In addition to the other items listed, I wish my 3A had the removable gauge panel.  Electrical work would be much easier.   A glove box would come in handy too.

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: The Superior CJ-3A trait
« Reply #13 on: November 08, 2014, 06:47:38 PM »
Some minor stuff. Different floor drain holes. Different tool compartment latch.
Bob W

Offline oldtime

  • Willys Guru
  • ****
  • Posts: 234
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: The Superior CJ-3A trait
« Reply #14 on: November 09, 2014, 03:23:50 PM »
CJ-3A body vs M38 body .........
Concerning floor pans I don't see any big advantage to the removable transmission panels unless the drivetrain is extensively modified requiring custom shaped floor pans.
As for the M38 tailgate mounted spare I feel that it's a superior location to the 3A side mount but inferior to a well designed swing out carrier.
The military dash panel glove box is nice but it interferes with heater installations.
I'd certainly choose a heater over a glove box.
Yeah getting to the gauges can be a real pain on the 3A but normally it rarely needs to be serviced.
I kinda like the park brake cane handle on the left side like the M38, but at least the 3A version is well angled to accomidate right hand use.

CJ-3A body vs MB / GPW body
Personally I would not consider a jeep without the tailgate.
For me that alone easily rules out the MB/GPW jeeps.

CJ-3A body vs CJ-2A body
Although the 2A has a "cool" looking windshield it is not nearly as strong as the 3A design nor as easy to mount a modern top.
I find the Bestops are much more practicle for everyday use.
The 2A bow pockets are useless you have an original style top.

CJ-3A body vs all other CJ bodies
We must remember that the 3A is a near direct descendent from the LRV.
I seriously doubt that any tub was lighter than the 3A version.
In that sense it is the most true form to the original military stipulations that started it all.

Ones intended useage obviously affects their choices.
For me its merely a matter of everyday practicality yielding to a universal form.
Concerning universal function and practicality I really don't feel that the stock 3A body can be beat.
And the stock CJ-3B body is easily my favorite runner up.
Afterall; the flat fenders and tailgate serve one very well in lieu of a real table.

Should we further address stock bodies vs modified bodies ?
« Last Edit: November 09, 2014, 03:29:18 PM by oldtime »