The CJ3A Page CJ3B.info

Author Topic: How'd Your Willys Look on Day One??  (Read 55783 times)

0 Members and 1 Guest are viewing this topic.

Offline F Bill

  • Flatfender Master
  • *****
  • Posts: 1402
  • Karma: +1/-0
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #30 on: December 20, 2012, 10:13:23 AM »
Here's a view of the custom tailgate and fence stretcher on day one. Since then we have done a rattlecan �resto to keep Coleman Beautiful, and so far in 5 years it has kept the rust at bay. �Pintojeep is safely in the garage , awaiting time to reposition the engine in the frame so it isn't sticking thru the firewall into the tub, and the driveshafts will be in the right place as well as the fan/ radiator spacing. Then off to 11 inch brake land, rebuild or replace the T -90, wire up some lights, horn and wipers, and we will be ready to go to Colorado. Before I do any of that I have to get my shop shipshape, as I brought my tools down from NY and have yet to get everything put away and set out where it is useable. Gotta get the shop wired to run the compressor and welder, too.

With being on the road 300 days a year or more it is hard to get anything done.We stopped work Thanksgiving this year, so the honeydo lists have been getting chipped away at and things are looking up for progress on the PintoJeep. (Already have new bathroom plumbing, window , and walls installed, gotta paint and do trim now and then it is off to the shop!)
« Last Edit: December 20, 2012, 10:23:54 AM by F_Bill »
Owner of the world famous?? Pintojeep 3A and one yet to be named stock project 3A.
Based in central TX and upstate NY.

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: How'd Your Willys Look on Day One??
« Reply #31 on: December 20, 2012, 10:17:53 AM »
Quote
No brakes of course, (What jeep project EVER comes with brakes?) ...
Now and then.
Both my Jeeps, the '54 3B and the '57 Wagon had just had a complete brake job done before I bought them. I drove them both home.
Though I'm betting the 3B was done wrong - long shoe to the rear instead of front. I have to really stand on the pedal to make it stop. Can't lock up the wheels even in my gravel driveway. The Wagon, on the other hand, will lock up the wheels on pavement with what I consider normal foot pressure - based on over 50 years of driving - many, many of those years with no-power-brake vehicles.
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #32 on: December 20, 2012, 03:52:55 PM »
FBill--Finally!! The infamous Pinto Jeep!! :) �I've read a little about your Willys, but the begining was a little scetchy. �What never ceases to amaze me is the modifications that folks have done to these Jeeps over their history, and how much effort many of us put in, to undo it. �
Trust me, I like an all original Willys as much as the next guy, but I also appreciate the changes that were made....to make it more useable for the POs. �A pinto engine added to compensate for the heavy tub?? �Was it something he just happen to have laying around?

Through history, baring military conversions, is there another vehicle that has been more 'modified' than a Willys? �I think not!

Love the fence stretcher too! �[smiley=thumbsup.gif]

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline Operation Overlord

  • Project Jeep (Newbie)
  • *
  • Posts: 29
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #33 on: January 28, 2013, 09:34:59 PM »
Day 1. Runs and drives but does not stop. Oh and leaks fuel everywhere.
1949 CJ3A, KTM 300XC-W (sold), 73 Honda CT90

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #34 on: January 28, 2013, 10:29:10 PM »
Mike,

That's a good looking Willys!  How 'bout some history...  How did it find you?

Maybe it's the photo, but that rear wheel looks a bit different.  Not sure I've seen a wheel like that before.

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline Operation Overlord

  • Project Jeep (Newbie)
  • *
  • Posts: 29
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #35 on: January 28, 2013, 11:44:32 PM »
I found it on Craigslist from a guy who used it as a hunting Jeep.  Overall it's in good condition.  From a little research it appears to have had a hard top at some point.  It came from Minnesota and the front tires are snow tires.  The oil filter canister is also mounted on the fender instead of the engine block which combined with the snow tires and Minnesota origin leads me to believe it used to be configured as a snow plow Jeep at some time.  

As for the back tires they are 14" rims and are not original so they will be replaced. Luckily the rear end is the original Dana 41 though.
1949 CJ3A, KTM 300XC-W (sold), 73 Honda CT90

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: How'd Your Willys Look on Day One??
« Reply #36 on: January 29, 2013, 11:37:06 AM »
Pretty rusty - but I've seen MUCH worse (like one of my 3Bs). Looks fixable.

I especially like the "gas tank" on the front bumper, leaning against the grille.  ;D

1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: How'd Your Willys Look on Day One??
« Reply #37 on: January 29, 2013, 11:41:26 AM »
Quote
Day 1. Runs and drives but does not stop.
I've seen so many examples of this.
Why do people give up on a Jeep when the brakes wear out? "Yeah, the brakes went out so I parked it behind the barn. That was, oh, maybe 12 years ago."

Brakes are one of the easiest and cheapest fixes.
Quote
Oh and leaks fuel everywhere.
Yeah, old Willys leak.
One of the guys on the 3B forum has in his signature "Everything Leaks".  ;D
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #38 on: January 29, 2013, 10:17:33 PM »
I've been watching craigslist daily looking for a flat fender. I realized that a 3A would be best for me as I just didn't fit well in the 2A's that I tried. Two 3A's were available locally. One has an f-head and a huge hole in the hood, and some easily reversible mods and I've looked at it three times but could not bring myself to make and offer....then this one popped up. Not as nice as the other, but very original and very well used. owned by the same family since 1959...I just thought that this 3A needed good home....the floors are very �rusty, it does not run, but all the parts are there, gauges, mirrors, wiper motor, and all the engine compartment parts are stock...

Brought it home yesterday...cleaned the pine needles, leaves, rust flakes and a rat's nest out of it today....


« Last Edit: January 29, 2013, 10:18:35 PM by 1955CJ-5 »
1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: How'd Your Willys Look on Day One??
« Reply #39 on: January 30, 2013, 09:44:55 AM »
Hey, looking pretty good.
You've got a draw bar and a PTO - well at least the stick in the cab. Are the PTO shafts still in place underneath?
Is that center seat home made? If it's a factory or period aftermarket, it's a rare bird.
Looks like lots of fun ahead.
More pictures as you go, please.
« Last Edit: January 31, 2013, 03:23:54 PM by johnrb3b »
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #40 on: January 30, 2013, 10:29:29 AM »
The PTO is there, rear drive shaft is there. The front bumper and frame horns are untouched. It has a Harrison heater with a big old flat under dash on-off switch-looks more like a circuit breaker.  The center seat is a period aftermarket.  I'll get a picture of the label but was made by Dumas manufacturing in Oklahoma.

1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #41 on: January 30, 2013, 10:51:10 AM »
More bondo and pop rivets than steel





After:

Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline Quebec Jeep

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 1193
  • Karma: +0/-0
  • CJ-3A 1950
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #42 on: January 30, 2013, 11:23:03 AM »
I have to admit it!
I'm a Garage gnome Fan!
I'm jeepcoholic!

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #43 on: January 30, 2013, 12:56:32 PM »
Nate...You cheated!! �Only before pictures are allowed. ;) �The plan was to do a new thread that included 'after', and or 'current' views.

That said, I have really admired how yours turned out. � I'm not sure I ever saw the beginning. �

The other part is to tell us a little about it's history; �What you know about its life prior to your ownership. �And why you decided this was the 'one' to bring home.

Tim � � �
2-1949 CJ3As
1-1946 CJ2A

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: How'd Your Willys Look on Day One??
« Reply #44 on: January 30, 2013, 01:16:25 PM »
Ohh Sorry! �[smiley=embarassed.gif] I was on my iPhone and was bored in between classes. Shoulda read the instructions... Thanks though! I had the restoration thread here before the move and it is over on the 2A page as well.

The before pictures were taken in 2008 when I 14 and was just about to start ripping it apart. My dad got it off a job and used it for plowing for several years before then. The guy he got it from used it as a plow jeep and to run around town with. He got it from a tobacco farmer who bought from Monsanto Chemical Co of Springfield MA who bought it new. At Monsanto, it was used as a runabout for the couple hundred acre plant. Now this is the very weird part, my two grandfathers worked there at the same time my jeep was there and they were both in maintenance and both probably drove it. On the gas cap, it has Formalin Jeep Monsanto SPR inscribed on it. I left that cap on despite it being beat up. I have never been able to figure out what that means. I finished restoring it when I got my driver's license.



« Last Edit: January 30, 2013, 01:17:56 PM by garage_gnome »
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted