The CJ3A Page CJ3B.info

Author Topic: Why does everything have to be a fight ?  (Read 3450 times)

0 Members and 1 Guest are viewing this topic.

Offline Kenny_Kustom

  • Willys Fan
  • **
  • Posts: 72
  • Karma: +0/-0
  • Too cold outside to play....
    • View Profile
Why does everything have to be a fight ?
« on: April 15, 2013, 08:58:55 AM »
The proper 3a rad shroud didn't fit my 2a rad ( in my 3a) So, i dropped the $500 on the 3A rad from walcks.
Put in it, and now i get to re do the alternator mount !! YAY!!! �>:( >:( ::)

I guess its not all bad, as the alt was about 2" too far forward to begin with.
I should have just left this whole thing alone, and just driven it the way it was...



Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #1 on: April 15, 2013, 02:27:15 PM »
Come on Kenny,

What would be the fun in just driving them?? ;) �In all honesty, it can sometimes be a bit frustrating. �That's what makes research and repairs so interesting on these old beauties. � Lot's of interchangeable parts and modifications over 60 years. �

On mine, I was going to fix the brakes, patch a couple holes in the side panels, then spray a little ratttle can paint...

Next thing I knew, my Willys was in hundreds of pieces scattered all over my garage.

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #2 on: April 15, 2013, 05:15:39 PM »
You may have noticed that we all seem to have cute affectionate names for our jeeps.  This is actually a coping mechanism we use to project on these vehicles the behavior and attributes we wish them to have.  Mine is called Triple X for the simple reason that I had to do just about everything on it three times!!!

Soldier on, it's worth it.
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Macgraham

  • Flatfender Enthusiast
  • ***
  • Posts: 187
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #3 on: April 15, 2013, 06:17:56 PM »
That's why we do Jeeps cause the fun never ends. :P ;D :'(

Offline Kenny_Kustom

  • Willys Fan
  • **
  • Posts: 72
  • Karma: +0/-0
  • Too cold outside to play....
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #4 on: April 15, 2013, 08:59:11 PM »
I have done ground up builds on jeeps before. All either yj's or tj's. Nothing this old.
I bought this one as a restored jeep. My intentions were to not do anything to it....  ::)
« Last Edit: April 15, 2013, 09:00:29 PM by Kenny_Kustom »

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #5 on: April 16, 2013, 06:07:15 AM »
That's what happens you start modifying things!  ;)
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: Why does everything have to be a fight ?
« Reply #6 on: April 16, 2013, 09:34:33 AM »
Quote
My intentions were to not do anything to it.... �::)
Famous last words. ;)
I bought mine to just drive.
Then I found a few things that needed fixed.
Then I decided I needed to add a couple things.
Then . . .
But I've done nothing that kept me from driving it.
I won't be doing a tub-off restoration.
Famous last words. �;D
« Last Edit: April 16, 2013, 09:35:19 AM by johnrb3b »
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline Kenny_Kustom

  • Willys Fan
  • **
  • Posts: 72
  • Karma: +0/-0
  • Too cold outside to play....
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #7 on: April 16, 2013, 09:47:26 AM »
Quote
That's what happens you start modifying things! �;)


That's the thing!! I have no problem with the fight, when its me, changing from stock.
BUT I WAS PUTTING IT BACK TO STOCK!! Lol.....
Yes the alt isn't stock. But I need 12volts.
Oh well. Ordered the alt bracket and proper adj bracket.

Offline Kenny_Kustom

  • Willys Fan
  • **
  • Posts: 72
  • Karma: +0/-0
  • Too cold outside to play....
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #8 on: April 22, 2013, 06:52:51 PM »
My latest endeavor.
The oil line from the filter to the front cover.
Came off the filter housing ok.
Looks like someone brazed the other end to the cover!!!! >:(  :'(

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #9 on: April 22, 2013, 07:50:17 PM »
There is a hex fitting that is brazed onto the cover from the factory. The hose should unscrew from that with a brake line type flare fitting. It should be a 7/16" wrench.
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline Kenny_Kustom

  • Willys Fan
  • **
  • Posts: 72
  • Karma: +0/-0
  • Too cold outside to play....
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #10 on: April 22, 2013, 09:04:13 PM »
Quote
There is a hex fitting that is brazed onto the cover from the factory. The hose should unscrew from that with a brake line type flare fitting. It should be a 7/16" wrench.


Gotcha !! It was 10 to 5, and i just had a quick look before going home. I'll check it in the am !!! Thanks !!

Offline Kenny_Kustom

  • Willys Fan
  • **
  • Posts: 72
  • Karma: +0/-0
  • Too cold outside to play....
    • View Profile
Re: Why does everything have to be a fight ?
« Reply #11 on: April 23, 2013, 08:18:45 AM »
Quote
Quote
There is a hex fitting that is brazed onto the cover from the factory. The hose should unscrew from that with a brake line type flare fitting. It should be a 7/16" wrench.


Gotcha !! It was 10 to 5, and i just had a quick look before going home. I'll check it in the am !!! Thanks !!



YUP.. Bang on. Got it out. The hose pretty much fell apart in my hands. I need to be able to spend some solid time on this thing. I end up just getting 20 min here and there in between other cars that come in.