The CJ3A Page CJ3B.info
« previous next »
Pages: [1]   Go Down

Author Topic: resistor  (Read 1723 times)

0 Members and 1 Guest are viewing this topic.

Offline CJJay

  • Project Jeep (Newbie)
  • *
  • Posts: 41
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
resistor
« on: April 15, 2012, 12:00:25 AM »
Forgot to ask about the in line resistor. The only way to getit to run was to by pass the one resistor I had from several years ago. It did seem to work on my truck and it won't work on this cj so h do I get a correct resistor to put in line with the coil to not burn out my points.
Logged

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: resistor
« Reply #1 on: April 15, 2012, 09:55:08 AM »
By the sounds of it you maybe converted the jeep to 12 volts from 6?  I did the same thing, but was able to buy a coil from NAPA that has the resistor built in, that way I was able to keep the wiring all according to the manual.
Logged
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Carls_jeep

  • Flatfender Master
  • *****
  • Posts: 1746
  • Karma: +0/-0
  • ...
    • View Profile
Re: resistor
« Reply #2 on: April 15, 2012, 02:46:49 PM »
It sounds like your coil has the resistor built into the coil. Adding another resistor would make the spark very weak.
Logged

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: resistor
« Reply #3 on: April 15, 2012, 06:15:21 PM »
Hey Carl, what I was sayin was to remove all the other stuff, put the wiring back together as defined in the manual, and use a coil with the proper resistor built in.  That way all the voltages are correct at the right locations.
Logged
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Carls_jeep

  • Flatfender Master
  • *****
  • Posts: 1746
  • Karma: +0/-0
  • ...
    • View Profile
Re: resistor
« Reply #4 on: April 15, 2012, 10:56:48 PM »
Yes, we're both saying the same thing.
Logged
Pages: [1]   Go Up
« previous next »