Getting ready for the next project, so all my extras need to go.  Sorry it's such a long list but here goes anyway (in US Dollars)...  (Modified this post today (20/5) to remove sold items)

1.   PTO Pulley Drive - $500
2.   PTO Gear Box  - $300
3.   PTO Shifter   $100
4.   Early oil filler tube with dip stick - $25
5.   Harrison Heater - $50 has repairable rust holes in the shell.  Core holds water     but not pressure tested, fan motor works, Harrison data plate in good shape.
6.   Early Tailgate (No cut outs in flange, solid ) - $150
7.   Crankshaft - $50
8.   Camshaft - $50
9.   Valves  (set) - $25
10.  Springs (set) - $25
11.  Lifters (set) - $25
12.  Cylinder head - $50
13.  Timing gear cover- $25
14.  Oil pan - $25
15.  Bell Housing – $25
16.  Fly wheel – $50
24.  Monroe Lift – cast cylinder housing, w/cyl, lift arms and pins - $500 (height adjustment mechanism is straight, free turning and smooth, with no play.)
27.  Monroe Lift reservoir with controller (2) - One has a hole in the bottom that needs to be patched - $200 / $50 
30.  Monroe Lift crankshaft driven hydraulic pump (the correct one, no cracks or dings, with extra, new, rubber disc) - $500
32.  Draw bar complete and straight with draw bar plate and 2 small diamond shaped plates for the cross member mounting points - $75   
33.  Monarch fan belt driven hydraulic pump for snow plow, etc - $50
35.  Water pump, take out, condition unknown - $25
36.  Ring and pinion for Dana 25 front axle.  I believe it’s a 4.38.   In nice condition.  Rescued from a tube that had the king pin bearing seats ovalled out - $50
39.   Oil filter with mounting bracket. - $40

For a 50% deposit I can bring any item to the June 12 reunion in Kempton PA.   I can also provide an image of any item, but please, serious inquiries only.

Thanx for looking!
Quentin

Ladies and Gentlemen, the Carbs, CJ2A rad, and generator are spoken for.

Thank you,
Q