The CJ3A Page CJ3B.info
« previous next »
Pages: [1]   Go Down

Author Topic: Steering Column Bracket  (Read 1215 times)

0 Members and 1 Guest are viewing this topic.

Offline JKWillys

  • Posts: 0
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Steering Column Bracket
« on: February 17, 2025, 09:35:19 PM »
Would anybody be able to get a measurement of the steering column bracket arm length in red in the photo? Also, the center to center measurement between the two bolt holes that goes on the dash?
Logged

Offline Rus Curtis

  • Willys Guru
  • ****
  • Posts: 335
  • Karma: +6/-1
  • Retired
    • View Profile
Re: Steering Column Bracket
« Reply #1 on: February 18, 2025, 11:46:07 AM »
JK,
I've got everything bolted up so as close as I can measure, the holes are 7 1/4" and the arm is about 2 1/4" (don't really know about the radius though).
« Last Edit: February 20, 2025, 02:48:53 PM by Rus Curtis »
Logged
'54 CJ-3B "Green Gruntt"
Bantam T3-C

Offline JKWillys

  • Posts: 0
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Steering Column Bracket
« Reply #2 on: February 20, 2025, 10:28:56 AM »
Thank you, that helps!
Logged
Pages: [1]   Go Up
« previous next »