My Willys 3A and 3B Community
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome everyone from the CJ3B!
Willys is a big family.
Home
Help
Search
Downloads
Gallery
Login
Register
My Willys 3A and 3B Community
»
TECH FAQ SECTIONS
»
Engine compartment
»
oil pressure gauge reading
« previous
next »
Reply
Print
Pages: [
1
]
Go Down
Author
Topic: oil pressure gauge reading (Read 1118 times)
0 Members and 1 Guest are viewing this topic.
JohnK
Project Jeep (Newbie)
Posts: 16
Karma: +0/-0
oil pressure gauge reading
«
on:
August 28, 2023, 12:38:50 PM »
Quote
I have a hardline connection from my gauge to the oil galley. It is a used gauge I bought. I have good pressure 20-40 but at times the gauge drops to zero for 10-15 seconds and then back up for a few minutes before dropping to 0 again. I've thought about getting a new gauge but wanted to check here for any ideas first. This is a newly rebuilt engine and I don't recall seeing this issue with the previous engine.
Thanks in advance.
John
Logged
1958 CJ3B stock
In restoration
Chuck W.
Project Jeep (Newbie)
Posts: 47
Karma: +2/-1
Re: oil pressure gauge reading
«
Reply #1 on:
August 28, 2023, 04:29:30 PM »
Quote
I would get a good, liquid-filled test gauge and connect it directly to the block.
$12. on e-bay
«
Last Edit: August 28, 2023, 04:37:02 PM by
Chuck W.
»
Logged
1964 CJ3B "Shelby Joy"
1952 M38 w/M100 trailer
1966 M274A2
JohnK
Project Jeep (Newbie)
Posts: 16
Karma: +0/-0
Re: oil pressure gauge reading
«
Reply #2 on:
August 29, 2023, 11:22:09 AM »
Quote
Thanks Chuck, I have a new gauge coming today.
Logged
1958 CJ3B stock
In restoration
JohnK
Project Jeep (Newbie)
Posts: 16
Karma: +0/-0
Re: oil pressure gauge reading
«
Reply #3 on:
September 11, 2023, 03:02:03 PM »
Quote
Added a quart of oil and all is well. Must has lost the quart during initial running - out the pan, out of the oil canister, and other assorted places until I tightened things up.
Logged
1958 CJ3B stock
In restoration
Mark W.
Willys Fan
Posts: 68
Karma: +1/-0
Chug A Lug
Re: oil pressure gauge reading
«
Reply #4 on:
September 11, 2023, 11:32:22 PM »
Quote
My dodge Dakota with a 3.9L V6 will drop to zero going around a sharp corner when the oil is more then a quart and a half low. so it is a thing that can happen.
Logged
Chug A Lug
1948 CJ2A Tub and Title
1949 CJ3A Windshield
1957 CJ5 Frame and Springs
134L 9.25" T-90 30%OD D18 D25 and D44 30 spline
11" Brakes, Saginaw Steering, 12V electrical
DIY Aluminum Hard top
Reply
Print
Pages: [
1
]
Go Up
« previous
next »
My Willys 3A and 3B Community
»
TECH FAQ SECTIONS
»
Engine compartment
»
oil pressure gauge reading