The CJ3A Page CJ3B.info
« previous next »
Pages: [1]   Go Down

Author Topic: Koenig 51 transfer case  (Read 1648 times)

0 Members and 1 Guest are viewing this topic.

Offline ZekeD

  • Willys Guru
  • ****
  • Posts: 218
  • Karma: +0/-0
    • View Profile
Koenig 51 transfer case
« on: February 23, 2020, 03:06:21 PM »
Help.   I am putting my 49 Cj3a back together and I have gotten to the Koenig box.   There are 5 “special bolts” that connect the aluminum case to the transmission.     When I went to clean them up it appears that the lock washers have packing around them.    The packing looks like water pump packing from my model A.   The lock washers are knurled on their outside face.   Since the Koenig is splash lubed from the transmission anyway, what is going on?

Any facts/opinions are welcome

Zeke Duge


Ps. This is one special bolt / washer,  and a second disassembled washer.
Logged
The most affectionate thing in the world is a wet dog.

Offline oldtime

  • Willys Guru
  • ****
  • Posts: 234
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Koenig 51 transfer case
« Reply #1 on: February 24, 2020, 10:44:54 AM »
The sealed washers are not correct for the Koenig PTO drive.
You should have Allen head bolts and very thick square edged split lock washers. (As shown in pic)
Logged

Offline ZekeD

  • Willys Guru
  • ****
  • Posts: 218
  • Karma: +0/-0
    • View Profile
Re: Koenig 51 transfer case
« Reply #2 on: February 24, 2020, 11:56:08 AM »
Thanks I didn’t see any reason for the packing.        Nuf said
Logged
The most affectionate thing in the world is a wet dog.
Pages: [1]   Go Up
« previous next »