The CJ3A Page CJ3B.info

Author Topic: Best wiring harness  (Read 1215 times)

0 Members and 1 Guest are viewing this topic.

Offline Goose

  • Posts: 0
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Best wiring harness
« on: February 13, 2020, 06:42:17 PM »
I need a new complete wiring harness for my '63 3b rebuild. Can someone suggest the best brand please. Also not sure it will matter but we're swapping the Hurricane for a 6cyl Dauntless.

Offline Sammydida3B

  • Project Jeep (Newbie)
  • *
  • Posts: 16
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Best wiring harness
« Reply #1 on: February 13, 2020, 07:20:05 PM »
I used a wiring harness from Walcks and it worked perfectly. My 54 3B had been converted to a Dauntless 225 with a 12 volt alternator and had a couple of other electric additions that was easily figured out. The schematic was a challenge at first but once that was figured out it went very well. I took my time and double and triple checked everything. Good luck with your project.
« Last Edit: February 13, 2020, 08:25:59 PM by Sammydida3B »

Offline derekredmond

  • SMF Administrator
  • Project Jeep (Newbie)
  • *****
  • Posts: 19
  • Karma: +1/-0
  • CJ3B.info
    • View Profile
    • CJ3B.info
Re: Best wiring harness
« Reply #2 on: February 14, 2020, 01:13:26 PM »
Derek Redmond
Kingston, Ontario
https://CJ3B.info

Offline tow hook

  • Project Jeep (Newbie)
  • *
  • Posts: 13
  • Karma: +1/-0
  • Still Plays With Jeeps
    • View Profile
Re: Best wiring harness
« Reply #3 on: February 14, 2020, 02:09:42 PM »
I need a new complete wiring harness for my '63 3b rebuild. Can someone suggest the best brand please. Also not sure it will matter but we're swapping the Hurricane for a 6cyl Dauntless.

funny i got wire harness from kaiser willys, and it was in a walcks box, and there part number on it. so walcks it is :)

Offline Goose

  • Posts: 0
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Best wiring harness
« Reply #4 on: February 14, 2020, 03:09:19 PM »
Went with Centeck because I have a local dealer plus he's fitting it to mate with the 231 V6. Thanks everyone.

Offline Doug_3B

  • Willys Fan
  • **
  • Posts: 79
  • Karma: +1/-0
    • View Profile
Re: Best wiring harness
« Reply #5 on: February 15, 2020, 04:22:06 PM »
Goose,

I think you'll be pleased with the Centech harness.  I got one for a 69 Bronco back in 2013 and it was worth every penny.  Good quality and went in easily.

Doug
-Doug
1963 CJ3B - F134 Hurricane, T90C/D18, OD, D27/44, alternator
1991 YJ - 4.0, AX-15, D-30 front, Ford 8.8 rear, 4-inch lift