The CJ3A Page CJ3B.info

Author Topic: Windshield angle  (Read 4627 times)

0 Members and 1 Guest are viewing this topic.

Offline bretto

  • Willys Guru
  • ****
  • Posts: 486
  • Karma: +0/-0
  • OD 3A cousin
    • View Profile
Windshield angle
« on: July 06, 2014, 09:23:19 PM »
I just got curious about this after putting on my new winter top.� Its rather saggy.� So I got to wondering about what the windshield angle should be, thinking if maybe mine could be angled too far back.

With the cowl measuring right at 0* reference.� Measured at the middle of of the frame I'm getting 18*, passenger is 18* and driver is at 16*.� I would of thought the driver angle would be a bit further back than the driver but its not way out of whack.

Has anyone checked theirs?� Care to?

Thanks,
Brett

Brett Orem, UT� [size=14]PHOTO DIARY OF MY BUILD[/size][/URL]

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: Windshield angle
« Reply #1 on: July 06, 2014, 11:35:37 PM »
According to this the measurement from the top of the windshield frame to the rear inside edge of the body is supposed to be 66 1/2"

http://www.cj3apage.com/cgi-bin/yabb2/YaBB.pl?num=1396057209

I just took mine over to storage and brought the welder home to repair the side steps or I'd sure measure it for you...I'll do it tomorrow though...
1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Windshield angle
« Reply #2 on: July 07, 2014, 06:23:23 AM »
I just checked the angle on 4 different Jeeps, 3 of them have tops on them. They are 14*, 14*, 15* and 16*. From memory I think 16* is correct. A canvas top is going to shrink if that will help any.
Bob W

Offline bretto

  • Willys Guru
  • ****
  • Posts: 486
  • Karma: +0/-0
  • OD 3A cousin
    • View Profile
Re: Windshield angle
« Reply #3 on: July 07, 2014, 10:42:26 AM »
Thanks guys, it looks like mine should be considered to be ok then.  I'm sure there is some tolerance or variance in the angle and also could be varied by where it is mounted in to the tub.
Just a little unnerving when you put on a pricey top and its saggy.  Hope it settles in like you say Bob
Thanks,
Brett
Brett Orem, UT� [size=14]PHOTO DIARY OF MY BUILD[/size][/URL]

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Windshield angle
« Reply #4 on: July 07, 2014, 12:03:44 PM »
Bretto,
�
Even after a couple years, my top is still saggy.� I've read that they will shrink over time, but they probably need to get wet.� I just haven't been caught in a rain or snow storm while the top is installed.

I used a spray bottle to get mine damp when I first got it, but the water just beaded up because of the fresh water proofing.




P.S.  I think I would rather it be saggy than tight.  I don't think I would want to fight it into position.  It's already a pain to install it by myself.
« Last Edit: July 07, 2014, 12:07:25 PM by athawk11 »
2-1949 CJ3As
1-1946 CJ2A

Offline Jesse

  • Willys Guru
  • ****
  • Posts: 298
  • Karma: +0/-0
    • View Profile
Re: Windshield angle
« Reply #5 on: July 07, 2014, 01:01:26 PM »
Wait until your top gets soaked in the rain, it will shrink up. Then after a while it will loosen again. Pretty much like a pair of jeans after you wash them/ wear them 


-Jesse
Its a jeep thing, but you would understand if you have ever lost your wallet.

Offline bretto

  • Willys Guru
  • ****
  • Posts: 486
  • Karma: +0/-0
  • OD 3A cousin
    • View Profile
Re: Windshield angle
« Reply #6 on: July 07, 2014, 01:41:44 PM »
 :o
You mean I have to take her out on the rain?� Something about put her away wet comes to mind. :)
Brett Orem, UT� [size=14]PHOTO DIARY OF MY BUILD[/size][/URL]

Offline Jesse

  • Willys Guru
  • ****
  • Posts: 298
  • Karma: +0/-0
    • View Profile
Re: Windshield angle
« Reply #7 on: July 07, 2014, 05:03:27 PM »
Put on a raincoat, turn the heater on, nice and cozy in the rain.

Oh, regarding windshield angle I just set mine so the gasket at the bottom smooshed down properly.

-Jesse
Its a jeep thing, but you would understand if you have ever lost your wallet.

Offline 1955CJ-5

  • Flatfender Master
  • *****
  • Posts: 2360
  • Karma: +0/-1
  • It wasn't always green....
    • View Profile
Re: Windshield angle
« Reply #8 on: July 08, 2014, 06:20:33 PM »
For what it's worth I got 17* measured at the center...
1955 CJ-5, A friend for 58 years....1951 CJ-3A, a new addition. 1929 Model A Ford Closed Cab Pickup...

Offline SteveW

  • Willys Guru
  • ****
  • Posts: 457
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Windshield angle
« Reply #9 on: October 05, 2014, 03:49:27 PM »
I finally found my angle indicator. I have a strong 16 degree with new weatherstripping installed
1950 CJ3A finished. 1950 CJ3A in pieces. 1947 Bantam T3-C trailer, 1946 Cushman Scooter 50 series