windshield frame/ tops

[dat]

OK,  not getting into why as much as if it can and will fit.
 
  a 3a tub and frame and motor with a 2a windshield, will a 2a top and beams work?

[athawk11]

When you say beams, do you mean the top bows?

With the 2A windshield, the 2A top will work.

Tim

[dat]

yes, bows,   thank you

[Bob W]

I'm thinking the front bow is closer to the rear on a CJ-3A than on a CJ-2A.

[athawk11]

I'm thinking the front bow is closer to the rear on a CJ-3A than on a CJ-2A.

Because of the shorter wheel house on the 3A? I would have figured the front bow pocket would have stayed roughly in the same place on the tub.

Dat, if that's the case, I guess you could move the front pockets forward.   

I'll take a measurement tonight.

Tim

[athawk11]

Bob's right Dat.

Measuring from the inside lip of the tub I get 27 1/4" to 27 1/2" to the center of the pocket for the 3A.

2A...29 1/2"  A substantial difference.  I guess you could move the pocket forward to accommodate the 2A top.

Why Willys?...Why? 

Tim

[Bob W]

Because of the shorter wheel house on the 3A?

More space for the driver, when setup as a half cab there needs to be more room.

[dat]

I may have to go topless