The CJ3A Page CJ3B.info

Author Topic: Body dimensions  (Read 1308 times)

0 Members and 1 Guest are viewing this topic.

Offline Gunslinger

Body dimensions
« on: March 28, 2014, 09:40:09 PM »
Anybody remember what the dimension is from the top of the windshield to the rear of the body?  Diagonal dimension?  I'm trying to figure out how far rearward my windshield is canted.
Thanks
Climbs trees, hides in the long grass, hangs out with wet dogs...

Online Bob W

Re: Body dimensions
« Reply #1 on: March 29, 2014, 07:34:40 AM »
The Bestop Tigertop instructions have the dimension that seems to be accurate.

http://www.bestop.com/images/installation_guides/51403.pdf

"Measure and record the distance from the top inside edge of the windshield to the rear inside edge of the vehicle body, not the tailgate. Take the measurement from approximately six inches inside the vehicle�s doors. Check to make sure that both sides measure equally. To install this top properly, this measurement must be 66 1/2 inches"
Bob W

Offline Gunslinger

Re: Body dimensions
« Reply #2 on: March 29, 2014, 10:01:38 AM »
Thank you sir!
Climbs trees, hides in the long grass, hangs out with wet dogs...