The CJ3A Page CJ3B.info
« previous next »
Pages: [1]   Go Down

Author Topic: Brake Drum Swap  (Read 2711 times)

0 Members and 1 Guest are viewing this topic.

Offline PeterL

  • Willys Fan
  • **
  • Posts: 68
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Brake Drum Swap
« on: March 10, 2014, 05:58:52 PM »
Good evening!  I was just looking over the stock jeep project section and I came across someone mentioning utilizing 3B drums in place of the 3A.  Would someone point me in the right direction to start investigating this upgrade?  Are the any cons? Will it look much different?

Thanks,

Peter
Logged

Offline Kirkski

  • Flatfender Master
  • *****
  • Posts: 526
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Brake Drum Swap
« Reply #1 on: March 10, 2014, 07:08:34 PM »
Thanks for asking this, I am interested in the process as well!
Logged
'52 CJ-3A

Offline Matto

  • Willys Guru
  • ****
  • Posts: 361
  • Karma: +0/-0
    • View Profile
Re: Brake Drum Swap
« Reply #2 on: March 10, 2014, 07:42:22 PM »
It's not really an upgrade to go from a 9" 3A drum to a 9" 3B drum. Although they adjust differently, they both perform the same IMHO :). If you would like to increase stopping ability, here's a link to the 3B page for upgrading to 11" drums- http://cj3b.info/Tech/Brakes11inch.html
You might want to convert to a dual reservoir master cylinder as well. 
Logged
1949 CJ3A project,1954 CJ3B weekend driver,2012 JK Rubicon DD and weekend trail rig,2016 Ford F350 for dragging cool stuff home :)

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: Brake Drum Swap
« Reply #3 on: March 10, 2014, 07:42:57 PM »
Nothing to it. Remove your old drum/hub assemblies, press the studs out, put new studs in the hubs and then slide the 3B drums right over the hubs. Or if you have access to axles from a 3B or CJ5, take the hubs off them. I had a set of axles from a 3B, so I just swapped the drums and hubs.



« Last Edit: March 10, 2014, 07:44:06 PM by garage_gnome »
Logged
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline PeterL

  • Willys Fan
  • **
  • Posts: 68
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Brake Drum Swap
« Reply #4 on: March 10, 2014, 08:00:29 PM »
Thanks garage gnome!  So, It is really just a drum swap?  Is there any need better/worse to swap the 3B hubs at the same time?
Logged

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: Brake Drum Swap
« Reply #5 on: March 10, 2014, 08:15:10 PM »
The hubs are the same between the 3A/B. Just the 3A has the drum behind the hub. I didn't want to go through the trouble of pressing the studs out.
Logged
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted
Pages: [1]   Go Up
« previous next »