The CJ3A Page CJ3B.info

Author Topic: Swaping Generator F134 to L134  (Read 616 times)

0 Members and 1 Guest are viewing this topic.

Offline Tumbleweed

Swaping Generator F134 to L134
« on: August 12, 2013, 10:09:28 AM »
Anyone see any issues with taking the generator off an F134 and using it on L134? I am thinking about putting an alternator on my 53 wagon and using the gen/volt reg. for my 49 CJ3A.

Thanks,

George
49 CJ3A - "Smokey"
53 Willys Wagon - "Wylie"

Offline bretto

Re: Swaping Generator F134 to L134
« Reply #1 on: August 12, 2013, 10:43:35 AM »
No problem as long as the output voltage is proper for the system.
« Last Edit: August 12, 2013, 10:44:28 AM by bretto »

Offline Quebec Jeep

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 1193
  • Total likes: 6
  • Karma: +0/-0
  • CJ-3A 1950
    • View Profile
Re: Swaping Generator F134 to L134
« Reply #2 on: August 12, 2013, 11:32:56 AM »
If I remember correctly, the generator on the F134 is 12 Volts.

The stock generator on a L134 is 6 Volts.

You should match proper generator and voltage regulator
I'm jeepcoholic!

Offline Tumbleweed

Re: Swaping Generator F134 to L134
« Reply #3 on: August 12, 2013, 04:34:32 PM »
Actually I had the generator rebuilt for 12V and matched up the VR on my wagon. I know this sounds crazy but my wife would like to have A/C in the wagon - something about the heat in Texas - Had a friend of mine put an airconditioner in his model A with stock engine and it was nice!
49 CJ3A - "Smokey"
53 Willys Wagon - "Wylie"