The CJ3A Page CJ3B.info
« previous next »
Pages: 1 [2]   Go Down

Author Topic: Pioneer Tool rack  (Read 19118 times)

0 Members and 1 Guest are viewing this topic.

Offline SteveW

  • Willys Guru
  • ****
  • Posts: 457
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Pioneer Tool rack
« Reply #15 on: June 17, 2017, 03:51:46 PM »
Working on fixing my door frames so I thought I would install it and see if it was a problem with the top.





Looks like I made it to custom fit. Didn't but I am sticking to it
Logged
1950 CJ3A finished. 1950 CJ3A in pieces. 1947 Bantam T3-C trailer, 1946 Cushman Scooter 50 series

Offline Mark W.

  • Willys Fan
  • **
  • Posts: 68
  • Karma: +1/-0
  • Chug A Lug
    • View Profile
Re: Pioneer Tool rack
« Reply #16 on: July 05, 2017, 02:48:13 PM »
I'm going with a Shovel and a Pulaski Axe as it has both the Axe edge and the digging blade of a Mattock. I'll also add in a large Bow saw. And of course a High lift Jack. 
Logged
Chug A Lug

1948 CJ2A Tub and Title
1949 CJ3A Windshield
1957 CJ5 Frame and Springs
134L 9.25" T-90 30%OD D18 D25 and D44 30 spline
11" Brakes, Saginaw Steering, 12V electrical
DIY Aluminum Hard top

Offline SteveW

  • Willys Guru
  • ****
  • Posts: 457
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Pioneer Tool rack
« Reply #17 on: July 05, 2017, 04:14:42 PM »
That would be nice to see. I would recommend when you do it start your own post as some differences would be helpful to others and what works for me may not work for you so comparisons won't get bogged in a multi page threads which tend to not get looked at. Here is what I did for my jack

http://www.cj3apage.com/cgi-bin/3Ayabb26/YaBB.pl?num=1434844398
Logged
1950 CJ3A finished. 1950 CJ3A in pieces. 1947 Bantam T3-C trailer, 1946 Cushman Scooter 50 series
Pages: 1 [2]   Go Up
« previous next »