One of the positive things about junk vehicles is not having to worry about being overly careful with regards to their outward appearance. Scratches and minor (or even major) dents are no cause for concern.� Can't push the thing into the garage on your own? No problem. Hook up the plow and give 'er a good shove.


After I was able to chip away most of the permafrost I got down to the real business. The PO had installed an electric fuel pump after the existing mechanical one died. A few quick tests determined that the electric one had� now followed in its predecessor's footsteps and also given up the ghost.� Luckily, I had a spare mechanical one that I bolted on and replumbed with the existing crusty fuel lines.
The distributor innards also need some TLC but instead of tediously replacing points etc I unceremoniously robbed the distributor from my 3A and swapped it out. That's the primary reason we have multiple Jeeps, right? They are all potential parts donors depending on the project at hand.
A little fiddling here and there and I soon got it to fire and run. Not bad, considering four days ago I dragged this thing out from under a tree and across a frozen lake. A running motor means immediate test drive, even if it is after 10pm and it's 5 degrees and I have no light except for the moon. 2WD, 4WD, and all gears works as they should. The brake pedal(awkwardly installed to the right of the gas "pedal", which is no more than a bent rod) is connected directly to the emergency brake. Creative, if nothing else.

Here's a quick video from further "testing" this morning. It was -3 degrees here...
[media]http://www.youtube.com/watch?v=PCmclBqMMF4[/media]
[media]http://youtu.be/XjruFz14PrQ[/media]