The CJ3A Page CJ3B.info

Author Topic: Trailer hubs for flat towing article  (Read 4625 times)

0 Members and 1 Guest are viewing this topic.

Offline Jesse

  • Willys Guru
  • ****
  • Posts: 298
  • Karma: +0/-0
    • View Profile
Trailer hubs for flat towing article
« on: November 11, 2014, 01:20:49 PM »
Hey boys, maybe you can help me recall something. I have been looking and looking for an article that described making a setup with trailer hubs and tires to bolt to the existing wheel lugs for towing purposes. Pretty sure the guy was putting the front of his jeep on a tow dolly and letting the back axle ride on trailer hubs. I cannot for the life of me find this however.

Have any of you read such a thing? If so, where the heck is it ?  :D

I'm contemplating a move to MT, and for obvious reasons the jeep would have to go along!

Thanks,
- Jesse
Its a jeep thing, but you would understand if you have ever lost your wallet.

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #1 on: November 12, 2014, 04:43:28 PM »
I don't know where to find that article. Are you using a tow dolly? If so you would be fine by just removing the rear driveshaft and rolling along on the rear axle - assuming the wheel bearings are good.
Bob W

Offline duffer

  • Willys Fan
  • **
  • Posts: 54
  • Karma: +0/-0
  • Just old
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #2 on: November 13, 2014, 10:50:35 AM »
MT?????  Why would anyone move there?  And where in MT?

Like Bob said-just remove the drive shaft.  As long as the rear axle has lube, no problem flat towing several thousand miles or more.  No different than driving it except there is no torque loading so it should run cooler.
48 2A, two 49 3A's, 55 3B, 57 FC 170, 57 Wagon, two 68 CJ 5s (both 225's and 4.88), 2006 TJ Rubicon

John, Bozeman, MT

Offline Carls_jeep

  • Flatfender Master
  • *****
  • Posts: 1746
  • Karma: +0/-0
  • ...
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #3 on: November 13, 2014, 10:53:02 AM »
I would keep the road speed to 60 mph max using a front wheel dolly tow.

Offline Jesse

  • Willys Guru
  • ****
  • Posts: 298
  • Karma: +0/-0
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #4 on: November 13, 2014, 12:51:03 PM »
I have dolly towed the jeep for a couple of 200 mile trips after removing the drive shaft. I don't know, spinning 5:38 gears at 60+ mph just doesn't seem like a great idea. Maybe I saw this trailer hub idea in a magazine?? Someone will think of it eventually  ::)


I am thinking about moving to the Missoula area. My girlfriend found a water conservation job she likes, she could do grad school as well. I gave up Forestry a couple of years ago to go to Alaska. I could finish college and easily get a job in MT. Not to mention the fact that many of my friends have slowly trickled out there in the past few years. It's a neat place!

-Jesse
Its a jeep thing, but you would understand if you have ever lost your wallet.

Offline duffer

  • Willys Fan
  • **
  • Posts: 54
  • Karma: +0/-0
  • Just old
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #5 on: November 13, 2014, 01:44:41 PM »
Quote
I don't know, spinning 5:38 gears at 60+ mph just doesn't seem like a great idea.

I've put thousands of miles on 5.38's running 70 to 75mph with an overdrive-no problem unless that 134 is still under the hood.

Montana isn't for everyone.� But if you like mountains and the ability to leave the crowds behind, it's pretty hard to beat-at least the west half of the state.� Outdoor recreation is just outstanding-fishing, rock/ice climbing, skiing, backpacking, or trail running.� If you are moving to Missoula, absolutely buy this:

http://www.manta.com/c/mxf019p/back-roads-publications?ftoggle-frontend-prod-on=abTests.revenue.test_10312014_control&utm_expid=82789632-25.OzEpm4oGQWOCALlDNoBDpg.1&utm_referrer=https%3A%2F%2Fwww.google.com%2F

I know Willie and Jeanne are working on a couple more of those, including one for the Tobacco Root Mountains-my favorite Jeeping area.� The Flint Creek Range also has numerous off-road opportunities.� Willie and Jeanne live outside Missoula and he runs the local 4x4 club.

I have been posting my Tobacco Root trips here:
http://backcountrypost.com/forum/

As far as Jeep trails in the Roots, North Meadow is by far the best but with a stock Jeep you will be stacking a lot of rock and winch required.� A couple of N. Meadow jpgs.








And yeh, I know the hoods too high ;D
48 2A, two 49 3A's, 55 3B, 57 FC 170, 57 Wagon, two 68 CJ 5s (both 225's and 4.88), 2006 TJ Rubicon

John, Bozeman, MT

Offline bretto

  • Willys Guru
  • ****
  • Posts: 486
  • Karma: +0/-0
  • OD 3A cousin
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #6 on: November 13, 2014, 05:16:08 PM »
I thought I recognized that water crossing pic!

Thats the pic on Herms site

« Last Edit: November 13, 2014, 05:17:29 PM by bretto »
Brett Orem, UT� [size=14]PHOTO DIARY OF MY BUILD[/size][/URL]

Offline Jesse

  • Willys Guru
  • ****
  • Posts: 298
  • Karma: +0/-0
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #7 on: November 13, 2014, 07:18:21 PM »
Duffer, I have read your article many times! That is a great looking jeep you have. Two summers ago I was putting nitrogen samples through a machine. 2 seconds of work followed by 3 minutes of waiting. For 12 hours. So I opened up the 3b page and read just about all of it over the course of a couple days. Pretty fun, now I want a 3B...


-Jesse
Its a jeep thing, but you would understand if you have ever lost your wallet.

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: Trailer hubs for flat towing article
« Reply #8 on: November 14, 2014, 12:09:19 PM »
Oh Jesse, you're sliding down a slippery slope.
 ;D
Now you want ANOTHER Jeep.
 :D
Though I must say, a 3B would be a nice choice. As you can see from my avatar, I have one.
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline Quebec Jeep

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 1193
  • Karma: +0/-0
  • CJ-3A 1950
    • View Profile
Re: Trailer hubs for flat towing article
« Reply #9 on: November 14, 2014, 12:18:09 PM »
Hey John! Where is your 3A? Oups!  ;D ;D ;D

I guess you are still looking for one!  ::)
I'm jeepcoholic!

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: Trailer hubs for flat towing article
« Reply #10 on: November 17, 2014, 11:36:32 AM »
Sadly, I have reached the limit of my Jeep quota.
I have five - three Old Willys and two modern Jeeps.
The quota limit is set by space, money, time and energy. To say nothing of the wife who is very patient but "helps" me remember my limits.
 ;)
« Last Edit: November 17, 2014, 11:36:53 AM by johnrb3b »
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper