The CJ3A Page CJ3B.info

Author Topic: Home built press  (Read 2594 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Home built press
« on: August 22, 2014, 09:02:20 PM »
Earlier this week my 6V generator stopped generating. I took it, my voltage regulator, and the battery to and old time starter/alternator repair shop I discovered a couple years ago. The owner must be in his 80's and works from a barn out behind his house in the woods. He gutted my generator and got it back to me with all kinds of shiny new innards the very next day.

According to the sign, he's been in business since '72 and probably tinkering on stuff long before that. The shop, complete with Ronald Reagan portrait on the wall, is full of old time electronics diagnostic equipment and years of accumulated junk. I probably could have spent a week in there just pawing around.

Anyways, I spied this home made press and thought it was a pretty smart idea. Probably simple to build assuming you can operate a welder. Anyone here ever made or seen one like this? If you really need to add some dead weight you can pretty much hang from the thing.



« Last Edit: August 22, 2014, 09:04:20 PM by Ryan_M »
Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Home built press
« Reply #1 on: August 22, 2014, 09:07:24 PM »
That's a home-made arbor press. They are good for pressing small stuff like in generators and starters.
Bob W

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Home built press
« Reply #2 on: August 22, 2014, 09:22:02 PM »
BTW very cool shop. Not many of those are around now. Check out pp154 of Sept 1972 Popular Mechanics..

http://books.google.ca/books?id=R9QDAAAAMBAJ&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=false
Bob W

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Re: Home built press
« Reply #3 on: August 22, 2014, 10:02:40 PM »
That's great! The press plans are almost spot on and I had no idea vintage Popular Mechanics were available on Google like that. Looks like I have my reading picked out for the next 10 years or so.

And yes, super cool shop. The guy says he can build me a 6v or 8v alternator no problem. I know GarageGnome has a 6V alternator so I may take a closer look at going that route now that I have a local source.

Here's an old pic of that same shop I found online. The front parking lot is much more grass covered now but the barrels, the anvil, and BOTH jerry cans are still there. Wicked decent.



Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline Kirkski

  • Flatfender Master
  • *****
  • Posts: 526
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Home built press
« Reply #4 on: August 22, 2014, 10:07:36 PM »
Ryan,

 Thanks for sharing, I love shops like that. The setup at my local armature shop is much the same, stuff has been hanging around there for decades�

Bob, et' al,

I am so impressed at the level of competence in this Forum, I never cease to just say "How do they do that". Its no simple task to see something and then flip to page 154 of an old magazine and basically there it is.

 Bravo, just another reason why I am addicted to this Forum, I fell lucky to have found it.

 Kirk�
« Last Edit: August 22, 2014, 10:08:13 PM by Kirkski »
'52 CJ-3A

Offline SteveW

  • Willys Guru
  • ****
  • Posts: 457
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Home built press
« Reply #5 on: August 24, 2014, 02:53:58 PM »
That is the kind of place you need to find. Newer places don't have the knowledge and quite frankly don't much care about repairs that I have found. I had my starter supposedly worked on twice but not sure they did a whole lot. Still have a good engine shop around here but the best parts placed is closed after owner died and his 2 son's who worked with him didn't carry on with business. He had about a 12' row of books which he seldom had to look at and used a rotary phone and also smoked inside his own store.
1950 CJ3A finished. 1950 CJ3A in pieces. 1947 Bantam T3-C trailer, 1946 Cushman Scooter 50 series

Offline macrisel

  • Flatfender Master
  • *****
  • Posts: 639
  • Karma: +0/-0
  • Always in the middle of a project
    • View Profile
Re: Home built press
« Reply #6 on: August 25, 2014, 12:13:59 PM »
That is a gold mine!  I have a starter shop similiar to that here locally, but I'm not sure how long it will be around.  It is such a pity they are disappearing so quickly.  I would wager a bet that in 10 years, there will be no such thing to be found anywhere.. :-[

Offline dat

  • Flatfender Enthusiast
  • ***
  • Posts: 112
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Home built press
« Reply #7 on: August 26, 2014, 09:32:50 AM »
nice little press, those come in handy.  and you can do like in the magazine artyicle and adapt it with a hydrolic jack
1950 cj3a, she was a swimmer and wears rust well