Ask and ye shall receive:
This is what you see when you open the box, all this electronic stuff is bolted to the front cover;

So here is some of the componentry:
Antenea:

Tuner knob and volume knob, both of these actually use the bells on the outside of the box as knobs.� Also note that the hammer is missing between the bells.

Here's the battery connections, you can see bracketry on the back wall for a stack of what looks like D cells, the bracket you see is the top one, looks like the negative side as it has the spring like an old flashlight.� The connector in front looks like a larger version of a 9 volt.�
<a href="
http://s1089.photobucket.com/user/banjo19/media/phone4_zps74023ac9.jpg.html" target="_blank"><img src="
http://i1089.photobucket.com/albums/i356/banjo19/phone4_zps74023ac9.jpg" border="0" alt=" photo phone4_zps74023ac9.jpg"/></a>
Now this is interesting, the wiring diagram on the front cover is actually the diagram for the original phone!� No help figuring this out but really cool anyway is it pedigrees the box.
Sorry, tried to post those last two and I keep getting an error message some 403 error.� That happened last time as well....
<a href="
http://s1089.photobucket.com/user/banjo19/media/phone5_zps00c8abb0.jpg.html" target="_blank"><img src="
http://i1089.photobucket.com/albums/i356/banjo19/phone5_zps00c8abb0.jpg" border="0" alt=" photo phone5_zps00c8abb0.jpg"/></a>
Well any ideas out there about how to get this going I'd appreciate it, I'm not radio guy!!