The CJ3A Page CJ3B.info

Author Topic: Day jobs?  (Read 14020 times)

0 Members and 1 Guest are viewing this topic.

Offline SteveW

  • Willys Guru
  • ****
  • Posts: 457
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Day jobs?
« Reply #15 on: December 06, 2013, 03:21:29 PM »
I am an electrical contractor with my own business for 13+ years and going on 36 years in the trade. As per Thomas Edison who had a winter home down here also a Tinkerer 1st class except for plumbing and painting which I can't abide, although have to do it occasionally.
1950 CJ3A finished. 1950 CJ3A in pieces. 1947 Bantam T3-C trailer, 1946 Cushman Scooter 50 series

Offline gmcjr

  • Flatfender Enthusiast
  • ***
  • Posts: 168
  • Karma: +0/-0
  • Even a blind hog finds a acorn every now and then.
    • View Profile
Re: Day jobs?
« Reply #16 on: December 06, 2013, 04:19:43 PM »
Quote
except for plumbing and painting which I can't abide, although have to do it occasionally.


I can relate!!
Gary in N. Texas
51 CJ-3A (old Trusty)
52 Ford 8n (ugly duckling)
46Farmall B (old Rusty)
18 Wrangler Jk

Offline JeffH

  • Project Jeep (Newbie)
  • *
  • Posts: 27
  • Karma: +0/-0
  • Ol skool jeeper
    • View Profile
Re: Day jobs?
« Reply #17 on: December 06, 2013, 09:34:19 PM »
I've been making sure you and your family fly safe when you leave the ground for the last 25 yrs working as an A&P mechanic for a major airline, the last 8 has been in our turbine engine overhaul facility in GA working the dayshift side of the clock!
Red '48 CJ2a Chevy 283, SM 420 trans, Brennans disc kit all corners Lockright in D41, Powerloc in D25, 3.15 Terra Low in D18, Belleview winch soon, original Jackman rims! Beachwood Canvas trailrun top

Offline F Bill

  • Flatfender Master
  • *****
  • Posts: 1402
  • Karma: +1/-0
    • View Profile
Re: Day jobs?
« Reply #18 on: December 06, 2013, 10:02:56 PM »
Pilot car operator, currently freezing my fingers off in Iowa and waiting for the truck that was hauling the wind tower to get a new transmission.  :(

(Driving a 2008 Silverado that turned 300,000 miles on it this week.)
Owner of the world famous?? Pintojeep 3A and one yet to be named stock project 3A.
Based in central TX and upstate NY.

Offline 1oldracer

  • Project Jeep (Newbie)
  • *
  • Posts: 43
  • Karma: +0/-0
  • bad decisions limit future options
    • View Profile
Re: Day jobs?
« Reply #19 on: December 07, 2013, 12:37:27 PM »
After many years in sales (mostly archery related) I am living and working at an airport in south Texas.� Here is a picture of Grunt and me going to work.� Part of my security duties is to attack any feral hog that gets through the fence onto the airfield.� Pilots just hate to see a bunch of hogs on the runway. The pigs don't pay much attention to me when I am in the patrol car, but when they hear the Willys coming the race is on.� F Bill - head west on 80 and warm your fingers up hitting the dollar button on the slots at Prairie Meadows� 8-)
�
If its not broke, work on it till it is

Offline p3ferris

  • Willys Guru
  • ****
  • Posts: 249
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Day jobs?
« Reply #20 on: December 07, 2013, 03:34:34 PM »
1oldracer   AKA  hired gun
 ;D

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Day jobs?
« Reply #21 on: December 08, 2013, 09:11:11 AM »
I'm in sales for Donaldson Company, we design and build filtration systems for heavy duty diesel engines.  I had the John Deere account in Iowa for a long time, now I manage large mining and truck accounts. JohnR, Jeff M, I'm pretty sure I know what brand of filters your using !!!
Been at this for 28 years and hoping to get about 4 more out it.

I started doing restoration work on agriculture tractors with my family several years ago, I had a Farmall B Narrow, a Massey Harris 22, Massey Harris 44 std, and an Oliver Cletrac Crawler, dad had 6 Olivers and my brother another 3.  Eventually we figured out we were spending more time keeping them running than driving them so we all sold the tractors and bought jeeps.  I've got a 1950 3A, dad bought a 1953 M38A1 and my brother has a 1975 CJ5.

Great Idea for this post, really cool.
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline F Bill

  • Flatfender Master
  • *****
  • Posts: 1402
  • Karma: +1/-0
    • View Profile
Re: Day jobs?
« Reply #22 on: December 08, 2013, 09:46:59 AM »
Quote
I'm in sales for Donaldson Company,

Would that be the same Donaldson company that made jeep air filters?
Owner of the world famous?? Pintojeep 3A and one yet to be named stock project 3A.
Based in central TX and upstate NY.

Offline Dez

  • Willys Fan
  • **
  • Posts: 83
  • Karma: +0/-0
  • I drive it rusty.
    • View Profile
Re: Day jobs?
« Reply #23 on: December 08, 2013, 11:40:41 AM »
I work for a Heavy equipment rental company in Pinedale, I'm the mechanic and Field mechanic (service calls). From Excavators to 14,000lbs Forklifts
Located in Pinedale Wyoming

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Day jobs?
« Reply #24 on: December 08, 2013, 01:44:31 PM »
Quote
Quote
I'm in sales for Donaldson Company,

Would that be the same Donaldson company that made jeep air filters?

Indeed it would be the same. 

We have a car collector group at the office, lots of 70s muscle cars but only 3 Jeeps.  2 (2A) 1 (3A).
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline jamesr

  • Willys Guru
  • ****
  • Posts: 343
  • Karma: +0/-0
  • If it's not broke, it's not used.
    • View Profile
Re: Day jobs?
« Reply #25 on: December 08, 2013, 06:21:29 PM »
Electrical contractor for 25 years, then real estate agent for 5 years, retired in '07. Started a frame off rebuild in
'07 and finised it in 2009.  Have put about 1000 miles on it, since then. It just sits in the garage begging for a run in the AZ desert.  I'll have to get to that one of these warmer days!
Home of the 4-wheel drive chicken coup.

Offline James P

  • Willys Fan
  • **
  • Posts: 78
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Day jobs?
« Reply #26 on: December 08, 2013, 09:43:13 PM »
I worked in a tool and die shop for 3 years, and then do to Michigan's crash of the auto industry was laid off. Was hired into a furniture manufacturing plant and moved up the ranks in the last six years for grunt to Material Coordinator (fancy term for Hilo driver). Oh and as I side note I am 30 almost 31.
1952 CJ3A

Offline duffer

  • Willys Fan
  • **
  • Posts: 54
  • Karma: +0/-0
  • Just old
    • View Profile
Re: Day jobs?
« Reply #27 on: December 09, 2013, 01:03:36 PM »
Retired geologist/hydrologist/soils guy collecting my entitlements ;D

To keep from getting bored, I have my prepetual do-it-yourself house building project and the family farm/ranch that is mainly just to keep me in perpetual agitation.� I gave up trying to put up the 80 acres or so of hay a couple years back.� It was either buy a newer swather or have someone else do it on shares and went for the latter.� I still have a couple hundred acres of mainly Douglas fir trees to tend to.� The mountain pine beetles did a good job removing the lodgepole pine from the stands over the last 3 years.

There are a few old tractors and crawlers including a couple Cat 22's (both 1937's), a R2 (38), D2 (46), and three D4's (two 45's and a 53); an IH T20 (37), and a Cletrac E (36?).� Tractors include JD D (1930) IH A (40), H (also a 40), and M (1950) Farmalls, two Case 731's (65 and 68) and a Case 830 (64).� All the Case's are diesel versions.

And that Nate guy got the Titan. :-[
48 2A, two 49 3A's, 55 3B, 57 FC 170, 57 Wagon, two 68 CJ 5s (both 225's and 4.88), 2006 TJ Rubicon

John, Bozeman, MT

Offline terryb

  • Willys Fan
  • **
  • Posts: 70
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Day jobs?
« Reply #28 on: December 11, 2013, 02:54:46 PM »
I work at Alcoa.  hired on fresh out of high school at the age of 18 and I've been there for 36 years now. have done many different jobs there but the most enjoyable one was as an overhead crane operator.
I got the willy's bug as a kid, watching to much MASH I guess. when my chance to get one came along I didn't hesitate. this spring I will get her plated and will enjoy taking it on many short trips around this area.
terryb

Offline Bruce_W

  • Willys Fan
  • **
  • Posts: 92
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Day jobs?
« Reply #29 on: December 13, 2013, 12:06:24 AM »
In 1969 I started at the local Chevy dealership as a "line mechanic apprentice". Sometime in the mid-to-late seventies we became "technicians". By the early nineties I didn't want to be a "technician" anymore, I wanted to be a "mechanic", but there was no demand for mechanics anymore, so I became a "gear selection engineer" (truck driver) (a good driver can turn a corner, cancel the turn signal, shift gears, turn down the radio, talk on the CB, and take a drink of coffee, all at the same time). Now I'm a "product delivery specialist" (still a truck driver) with an ag chemical/fertilizer supplier. But in my spare time, I'm what I always wanted to be - a mechanic!   BW
Until We Jeep Again...........