The CJ3A Page CJ3B.info

Author Topic: What stage are you at?  (Read 4506 times)

0 Members and 1 Guest are viewing this topic.

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
What stage are you at?
« on: April 17, 2013, 08:36:33 PM »
This is a test to see what level you are at with antiques of any kind. This is in no way saying that you are better or worst at keeping old iron alive than the next guy nor what is the right or wrong way. Please refrain from putting someone down, just post what stage best fits you and your current or past projects.

The Mechanic
You replace parts just for the sake of keeping it alive giving no care as to what is original or not. You just make it work. Most of us start out at this stage.

The Tinkerer
Your favorite paint brand is Rustoleum in which you just paint over the rust. You show interest in keeping things original, but are not as in depth as the Purist. You just want to make it presentable and usable, but not perfect.

The Modifier
This is a league all its own with sub-stages. It can range from poorly done modifications, to factory looking modifications and all the way to the limits of imagination. A lot of people find joy in this since they can make something totally their own.

The Purist
Just like the Modifier, there are sub-stages. These range from making something look 100% original, but with slight deviations on paint color or you add in some modifications that look almost factory to having it look like it just rolled off the assembly line. You spend countless hours sandblasting parts and making every piece perfect. You care about how it went together originally. The most extreme is matching the paint perfectly and locating original hardware for everything.

The Caretaker of History
This is the most advanced stage. You are concerned with age and history. You preserve the rust, the original paint and grime. It is all about patina for you. You care about the previous life and the scars from it. You cringe at the thought of having to use new parts or hardware. You work hard to age new parts and preserve old hardware. Not many make it to this stage.



Well, based on my last few projects, Titan, Famous and '49 jeep, I guess I would be a Caretaker of History. With my '53, I was a Purist, but that has kind of become a Modifier since the dual carb swap.  ;)
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted

Offline gmcjr

  • Flatfender Enthusiast
  • ***
  • Posts: 168
  • Karma: +0/-0
  • Even a blind hog finds a acorn every now and then.
    • View Profile
Re: What stage are you at?
« Reply #1 on: April 17, 2013, 10:47:08 PM »
Ill have to say, I fit the tinkerer bill, it works pretty good with a thin pocket book.
Gary in N. Texas
51 CJ-3A (old Trusty)
52 Ford 8n (ugly duckling)
46Farmall B (old Rusty)
18 Wrangler Jk

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: What stage are you at?
« Reply #2 on: April 18, 2013, 08:50:35 AM »
Yeah, me too.
I'm definitely The Tinkerer.
I really can't afford anything more serious.
I'd love to have the time, money, space, energy, etc. to do a full restore on an old vehicle. I'd love to drive something older than me to work every day. Sigh.
So I keep them running, drive them when the weather is decent and just have fun.
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline duffer

  • Willys Fan
  • **
  • Posts: 54
  • Karma: +0/-0
  • Just old
    • View Profile
Re: What stage are you at?
« Reply #3 on: April 18, 2013, 10:14:16 AM »
Part of my reply to Nate's same thread at ecj5:

You can ALWAYS build things better than what came from the factory because the factory is going the route of the absolute cheapest engineering solution that has a remote chance of lasting through the ownership of the first buyer.  Guess that makes me a modifier.  I can't recall a single vehicle I've owned over the past 50 years or so that didn't get something changed and several have had some pretty extensive changes, including my 3B.

I'm also not into garage queens. If I have a Jeep, it sure as hell is going to be used as a Jeep and eventually acquire scratches and dings that I do try to avoid. Makes no sense to be a purest or caretaker in that case. But I do hate bondo and never use the stuff as a rust cover-up, nor do I care for the "cover-it-up" panels, diamond plate or otherwise.
48 2A, two 49 3A's, 55 3B, 57 FC 170, 57 Wagon, two 68 CJ 5s (both 225's and 4.88), 2006 TJ Rubicon

John, Bozeman, MT

Offline macrisel

  • Flatfender Master
  • *****
  • Posts: 639
  • Karma: +0/-0
  • Always in the middle of a project
    • View Profile
Re: What stage are you at?
« Reply #4 on: April 18, 2013, 10:14:46 AM »
I put myself in the Purist catagory with my '51 3a, but slide back to the Modifier on my late model stuff and non-Jeep classics.

Offline F Bill

  • Flatfender Master
  • *****
  • Posts: 1402
  • Karma: +1/-0
    • View Profile
Re: What stage are you at?
« Reply #5 on: April 18, 2013, 10:20:24 AM »
Just a tinkerer...With as many projects as I have I would have to be independently wealthy to afford to be any higher on the scale.  Nice thing about being a tinkerer, new paint jobs and touch ups are as close as you nearest hardware store's spray paint section.. Bad thing is you need to visit them often. I used to be a purist but that was back when I had access to a beautiful shop with a spray booth and all sorts of room. And I had a real job with a real paycheck arriving every Friday.
Owner of the world famous?? Pintojeep 3A and one yet to be named stock project 3A.
Based in central TX and upstate NY.

Offline Macgraham

  • Flatfender Enthusiast
  • ***
  • Posts: 187
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: What stage are you at?
« Reply #6 on: April 18, 2013, 10:28:29 AM »
I guess I am a cross between a mechanic and a purist although I am certainly not a pro mechanic. Other than growing up with my Dad's 3A, most of my Jeep knowledge has come from folks here on the 3a site and some on the 2A. What I wanted was a Jeep that would go all day and bring me back. The only things not normal with my 3A are the brakes which are 11" and the 12 volt electrical system. The numbers don't match since the engine is early military, I think. I didn't even know I had 11" brakes until last sept when I was in Utah and Calvin and Carl told me.

Offline p3ferris

  • Willys Guru
  • ****
  • Posts: 249
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: What stage are you at?
« Reply #7 on: April 18, 2013, 11:57:54 AM »
I would put myself as a caretaker tinkerer.  #1  I do not put on new parts Unless I cannot find a good original #2 I try to keep it close to original no modifications to most of it...I went to 12 volts..but I have all the original parts to put it back.  I repair with welding the metal back into it  not replace the metal.  I will cover up the metal if I get tired for a while to preserve it untill I do more work time. I have the 2 floorboards to re do.  I spent 2 months just filling in the rust holes to make them almost like new  That is what I will do with the floor where the feet go.  It takes a LOT of time and pacients.  I like original  a lot  The same thing with my 58 pontiac.  Enough rambleing

Offline 3aJeeper

  • Flatfender Enthusiast
  • ***
  • Posts: 143
  • Karma: +0/-0
  • Luvs me a flatfender Jeep!
    • View Profile
Re: What stage are you at?
« Reply #8 on: April 18, 2013, 04:33:37 PM »
I'd have to go with the Mechanic/Tinkerer Hybrid (I do like Rustoleum!! �:D) Although calling myself a 'mechanic' is quite generous! �;D
I just want to have something I can run around in...not a rock crawler nor a trophy winner. Always wanted a flatfender jeep since watching 'Combat' and 'Rat Patrol' on television as a kid (in reruns, of course! ;) ). � It's gonna get used and gonna get dinged up. It's a jeep...it's just what they do.
1951 CJ3a
F-134 Hurricane engine

Offline Carls_jeep

  • Flatfender Master
  • *****
  • Posts: 1746
  • Karma: +0/-0
  • ...
    • View Profile
Re: What stage are you at?
« Reply #9 on: April 18, 2013, 08:14:40 PM »
Mechanic tinker is a fit for me.

Offline BMIC

  • Willys Guru
  • ****
  • Posts: 406
  • Karma: +0/-0
  • Weekend Mechanic
    • View Profile
Re: What stage are you at?
« Reply #10 on: April 19, 2013, 07:02:59 AM »
Golf ball in tall grass may be a more accurate moniker for me but Tinkerer works....
We are masters of the unsaid words, but slaves of those we let slip out... WC

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: What stage are you at?
« Reply #11 on: April 19, 2013, 04:25:05 PM »
Modified Purist....I like to bring them back to look original with a few mods...
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Comanche_County

  • Willys Guru
  • ****
  • Posts: 252
  • Karma: +0/-0
    • View Profile
Re: What stage are you at?
« Reply #12 on: April 19, 2013, 06:47:14 PM »
Mechanic Tinkerer Modifier....but I would like to introduce a new category.  The Poorest.  A blend of all categories forced upon me by my inability to lure venture capitalists and investors.  I also would like to restore and preserve but sometimes I am forced to use my grocery budget for Jeep stuff.


Georgia President of the International Flat Fender Club

Offline johnrb3b

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 906
  • Karma: +0/-0
  • No such thing as too many Jeeps - well maybe
    • View Profile
    • Jeeps and stuff
Re: What stage are you at?
« Reply #13 on: April 22, 2013, 10:32:27 AM »
What ?!?!
Blowing good money on ephemeral things like food and clothes, while depriving your Jeep of the repairs and upgrades it NEEDS.
 ;D
1946 2A - - - 1949 me - older than most of my Jeeps
1954 3B - - - 1957 Wagon - - - 2010 4-door JK
past Jeeps ---> '54 3B - no tub --- '59 3B - no engine
past addiction - VW ---> '69 bus --- '70 camper

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: What stage are you at?
« Reply #14 on: April 22, 2013, 06:43:29 PM »
Well, on my first one I would call myself a "Modifying Purist".  I modified a 3A to look as close to an M38 as I could afford.

The next 3A will put me into the Mechanic/Tinkerer category.

The 2A...I'm going to try to be a Purist.

Tim
2-1949 CJ3As
1-1946 CJ2A