The CJ3A Page

Author Topic: Lubrication tool for the hard places  (Read 338 times)

0 Members and 1 Guest are viewing this topic.

Offline Gunslinger

Lubrication tool for the hard places
« on: July 29, 2012, 10:16:46 AM »
I had two challenges this past week, putting lube into the steering box and the tranny/transfer case.  I got lucky when looking at my box of spare parts and I saw this left over oil line from before I did the full flow system.  It just so happens that the female end is an exact match for the threads on the steering box, so I pulled the zerk fitting and screwed the female into it, then I cut off the male end and it was an exact match for diameter of the nozzle on my pumper oil can.  filled the can with oil and pumped it intot he box until it was full, that was sooo easy.  I also used the same contraption to pump oil into my tranny, while I was laying on the floor.  Here's a couple pics.

Probably not a noteworthy event, but I thought I'd share it.

Climbs trees, hides in the long grass, hangs out with wet dogs...