The CJ3A Page CJ3B.info

Author Topic: Meet Triple X  (Read 7928 times)

0 Members and 1 Guest are viewing this topic.

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Meet Triple X
« on: January 15, 2012, 10:55:31 AM »
We've talked about this one for some time and I want to thank everyone that contributed to the revival. �Carlsjeep, Rocketeer, aboyandhisdog, athawk, commanche, commando, BobW, F-Bill. �All of you guys and awhole lot more have a seat in this ride, thank you.
Todd

Triple X at Rest



Added a roll bar from a Wrangler, with a storage pack from 4 wheel parts


Dash is pretty much standard, but I like the m38 throttle control better than standard, and I had to upgrade the tattle tale to a 12 v LED


This was cool, made a hand wiper from the extra parts from a broken vaccum wiper, driver side is electric

I found the everdry kit at Oldmoparts.com, my willys came with the metal cups soI thought it should go back on

If you open this up there is a cup holder �;D


Full flow Oil Filter system, the Aero quip hoses were for fun

Frontal shot

Sun bathing in the front yard �8-)
« Last Edit: January 15, 2012, 11:14:06 AM by Gunslinger »
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Meet Triple X
« Reply #1 on: January 15, 2012, 10:56:31 AM »
I thought I had loaded the pix not the link,

[size=36]Fixed[/size]
« Last Edit: January 15, 2012, 11:16:40 AM by Gunslinger »
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Meet Triple X
« Reply #2 on: January 15, 2012, 12:28:32 PM »
Very nice!!!!!   :)
Bob W

Offline aboyandhisdog

  • Flatfender Master
  • *****
  • Posts: 760
  • Karma: +0/-1
    • View Profile
Re: Meet Triple X
« Reply #3 on: January 15, 2012, 02:47:37 PM »
It looks great, Todd - you have to be happy with how everything turned out.  Is the color "Luzon Red"?  Your seats look to be in good shape...are you needing canvas to make a top or do you just want to change out the seats to canvas?  I'm also really impressed with your oil filter...60 psi with no drop-off...pretty sweet.  Now, go take a drive!
Tom


Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Meet Triple X
« Reply #4 on: January 15, 2012, 03:28:23 PM »
Gun!!  Awesome Willys!  That's a great color.   What inspired the name "Triple XXX"?  I like the way you did the seat belts.  It looks like they'll hold you in on some tricky back roads.  It really looks built and ready for fun.

Great Work!

Tim  
2-1949 CJ3As
1-1946 CJ2A

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Meet Triple X
« Reply #5 on: January 15, 2012, 07:00:00 PM »
Thanks Guys,
That color is from a NAPA book for a 1982 Buick, I added pearl to it ti give it a little lift, I tried to find Luzon Red but the color codes were a bit elusive.

The seats are vinyl covered foam not originals, they are OK for now. I do have a bikini top for it, not shown.  I altered a Smitty bilt bikini for a CJ7 to fit.  I was thinking about going with a full top, either with the original style or possibly with M38 bows if I can make them fit. We'll see.

Had it out last weekend, man is it fun to drive!!

I named it Triple X because it weemed I had to do everything 3Xs in order to get it right! :o
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Bob W

  • Flatfender Master
  • *****
  • Posts: 2309
  • Karma: +0/-0
    • View Profile
Re: Meet Triple X
« Reply #6 on: January 15, 2012, 07:57:18 PM »
M-38 bows should fit a CJ-3A fine. Just need to get the bracket in the correct location.

There may be an issue with the roll bar and the fit of the bows and top.
« Last Edit: January 15, 2012, 07:58:50 PM by Bob_W »
Bob W

Offline johnnybravo

  • Willys Fan
  • **
  • Posts: 96
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Meet Triple X
« Reply #7 on: January 15, 2012, 10:17:56 PM »
 :) GREAT PHOTOS.  THANKS FOR POSTING.
USAR Vet, Retired. MB, GPW, CJ2A, CJ3A, CJ3B, '47 WO 4x4 Trk, '47 WO 4X2 Wagon

Offline macrisel

  • Flatfender Master
  • *****
  • Posts: 639
  • Karma: +0/-0
  • Always in the middle of a project
    • View Profile
Re: Meet Triple X
« Reply #8 on: January 16, 2012, 10:16:35 AM »
Great looking Jeep!!
I have to warn you now..........I'm probably going to steal the cup holder idea ;D

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Meet Triple X
« Reply #9 on: January 16, 2012, 09:27:46 PM »
You rock Mac, go for!!!  I've got a couple of cans if you need one!! ;D
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Carls_jeep

  • Flatfender Master
  • *****
  • Posts: 1746
  • Karma: +0/-0
  • ...
    • View Profile
Re: Meet Triple X
« Reply #10 on: January 17, 2012, 10:03:49 AM »
 :o WOW, that's really nice. You can see there is a lot of time and love in the Jeep and it's time to enjoy it.

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Meet Triple X
« Reply #11 on: January 17, 2012, 12:23:14 PM »
Hey Gun,

I'm right there with Mac. � I didn't read your captions the first time through. �Totally stealing the cup holder idea. �Got the can already. �

I'm guessing yours is bolted down. �Your Jeep looks built to tear up a hillside. Wouldn't want the drinks flyin around.

What is the gauge for? �Mounted under the dash lip.

Tim
« Last Edit: January 25, 2012, 09:24:50 PM by athawk11 »
2-1949 CJ3As
1-1946 CJ2A

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Meet Triple X
« Reply #12 on: January 17, 2012, 07:50:52 PM »
Hey Tim
I've pulled that one, it was a secondary Oil Pressure gage, when I was having all the trouble I added a gage and ported it out of the rear cam bearing, 3rd port back.  It was an interesting experiment, I found that the Willys dash gage was pretty accurate at 20 psi to 50 psi, but below 10 it was fairly poor.  The second gage was a Sunpro, it would read in smaller increments at the lower pressure.  After that last build it wan unneccesary, I'm at a solid 50 psi at idle now, so no worries.
Todd
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Matto

  • Willys Guru
  • ****
  • Posts: 361
  • Karma: +0/-0
    • View Profile
Re: Meet Triple X
« Reply #13 on: January 18, 2012, 07:18:18 PM »
Hey Guns, Jeep looks great! We'll be sportin a ammo can before long to. ;D
Matt
1949 CJ3A project,1954 CJ3B weekend driver,2012 JK Rubicon DD and weekend trail rig,2016 Ford F350 for dragging cool stuff home :)

Offline Comanche_County

  • Willys Guru
  • ****
  • Posts: 252
  • Karma: +0/-0
    • View Profile
Re: Meet Triple X
« Reply #14 on: January 20, 2012, 06:10:47 PM »
Very nice Guns, in appreciation for your hard work, I will allow you to marry my first born daughter, you'll have to wait 9 years though.   :)
Georgia President of the International Flat Fender Club