I know some will feel my build is blasphemy but a lot of the original parts are long gone or damaged by time and neglect. I could have restored it with new and used parts but I want the look of the old style with some of the comforts of modern components. I'm 54 so I figure I will get maybe 25 years of use out of it before handing it down to one of my grandchildren.
I know it is an ambitious build but I am confident that I can do it. I am doing all of the build myself.
I have owned my 1950 CJ3A for approximately 20 years. It had a 1955 Chevy 283 when I bought it. I drove it when I first bought it but I ran out of money at the time and it sat for years. Now that I am older and have more time, I decided to build it the way I wanted. I decided to build it into a road worthy rock crawler. It will be a resto mod. First I changed out the 33 inch tires for 35's. I am boxing the frame. I have removed the leaf springs and built and upper triangulated 4 link rear suspension using TJ 3.5 inch lift coil springs. I bought a Dana 44 full floater kit from Herm. I also bought a locker, 30 spline axles and disc brake conversion/w parking brakes. I have trussed the rear axle in preparation for the upgrades.
The front axle will be replaced with a Dana 44 front axle from a newer vehicle. I will put coil over shocks and a 3 link in the front with high steer, disc brakes and power steering.
I already swapped out the weak T90 for a T18 4 speed that I had taken out of a 1969 Ford F100 I once owned. The Dana 18 transfer case had been rebuilt just before I parked it years ago after it self destructed on a trip.
I will be installing a Chevy 350 engine with vortec heads from Summit racing. As of now I am planning on installing an Edelbrock fuel injection system.
The body mounts have been cut from the frame and welded back 3.75 inches higher. I am using CJ5 body mount bushings to clear the transmission and engine. The tub has a few rust spots. I am going to cut them out and tig weld new metal in. The front fenders were garbage so I will be building aluminum flat fenders. It will be painted a spruce green with metal flake. The interior and underside of the tub will be black rhino liner. I will be building a custom roll cage.
The lighting will all be upgraded to LED. I have moved and built beefed up cross members. I will be building a custom aluminum fuel tank under the rear.