I agree with Carl. �However, it's your Jeep and you can certainly assembly it as you like, but I would suggest installing the entire drive train and test driving it thoroughly before covering it all up with the tub and fenders. �Much easier to work on if you discover a problem. �
I installed brake lines and hoses, clamps, etc., before the engine was in the way. �

Then the complete drivable rolling chassis was test driven for more than two hours before fitting the tub, fenders, grill, and hood.

Then the tub, fenders, and all were completely assembled. �This allowed for all cutting, grinding, and welding to be done before painting. �

That's the only way I learned that I had to modify the tub opening for the transmission. Would have hated to do this after paint.

After the test runs, body fitting, and painting, the final installation of the tub and other components took place.
