Well, I ended up going with a Repli Tub from WillysOverland. �While it is not perfect and still requires some "slight" changes, it did pretty much bolt right up to the frame. �In this respect, it did save a LOT of time compared to a standard MD Juan tub. �Each situation is different, but here are the major issues I have:
1. �One of the factory fenders did not line up with the repro tub. �However, I had bought the entire body kit so I just used one of the repro fenders and it fit fine. �Since I had to buy a windshield frame and hood, it was just as cheap to buy the entire kit instead of individual pieces.
2. �I'm still working on the e-brake bracket. �Search the 2A website if you are unfamiliar with this problem.
3. �You still have to drill all your holes for your seat mounts, footmans loops, mirrors, spare tire carrier, gas pedal mounts, ect.
4. �The top mounting brackets and gas tank brackets still have to be welded on.
There are a few other little things, but those are the big ones. �And remember, you are dealing with clean, new metal so it is not as bad as it sounds. �However, you do have to take a few shots of "courage" before you drill that first hole..
