The CJ3A Page CJ3B.info

Author Topic: Mini Project on ODie  (Read 12066 times)

0 Members and 1 Guest are viewing this topic.

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Mini Project on ODie
« Reply #15 on: August 04, 2015, 03:20:37 PM »
The shake down run had its ups and downs last night.

The good...The engine performed very well.  I have more high speed power.  The major leak is gone.

The bad... The brand new throw out bearing squeals and squawks. >:(

Will this pain never end?

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Mini Project on ODie
« Reply #16 on: August 09, 2015, 09:09:26 AM »
After the test runs, I ended up having a setback.  The brand new throw out bearing squeaked and squawked.  I pulled it back apart and fixed the issue.  All seems well now.

For me, 2015 will go down as a very bad year for Willys repairs and maintenance.  I've had very little windshield time. :-[

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline bretto

  • Willys Guru
  • ****
  • Posts: 486
  • Karma: +0/-0
  • OD 3A cousin
    • View Profile
Re: Mini Project on ODie
« Reply #17 on: August 09, 2015, 11:23:05 AM »
Ain't it all fun though!  Are your hands are permanently tattooed with oil and grease?
Brett Orem, UT� [size=14]PHOTO DIARY OF MY BUILD[/size][/URL]

Offline RICKG

  • Willys Guru
  • ****
  • Posts: 265
  • Karma: +0/-0
  • I never met a mule i didn't like.
    • View Profile
Re: Mini Project on ODie
« Reply #18 on: August 09, 2015, 11:28:55 AM »
Tim, we'll remedy the windshield time deficiency at the FCT......
« Last Edit: August 09, 2015, 11:51:11 AM by MC51986 »
OD MULE MC51986

Offline aboyandhisdog

  • Flatfender Master
  • *****
  • Posts: 760
  • Karma: +0/-1
    • View Profile
Re: Mini Project on ODie
« Reply #19 on: August 09, 2015, 08:38:35 PM »
Tim, I feel your pain.  The worst summer for me too.  Last week the red rascal could have burned up along with my garage.  The result is that now it is getting a new starter, an alternator to replace my generator, new oil lines and I have to move the oil filter.  Among other items.  The fun just never seems to end.  Hoping I can still afford to get down to the FCT.  ;)

What was the issue with the throw out bearing?
Tom


Offline Tumbleweed

  • Flatfender Master
  • *****
  • Posts: 516
  • Karma: +0/-0
  • 49 CJ3A
    • View Profile
Re: Mini Project on ODie
« Reply #20 on: August 10, 2015, 09:54:41 AM »
Hang in there Tim,

Almost FCT time and I'll bring you a cold Shiner Bock!
49 CJ3A - "Smokey"
53 Willys Wagon - "Wylie"

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Mini Project on ODie
« Reply #21 on: August 10, 2015, 11:08:29 AM »
Sounds good George!  I'll hold you to that.

Rick, after all this effort, I'm considering bringing my 2A to the FCT this year.  It's a mess, but might be fun...and challenging.  It runs.  It has new brakes.  It shifts.  But otherwise, it's a disaster. ;D

Tom, I did read about your electrical issue.  I wasn't sure I would be any help, so I let the sleeping dog lye.  The only similar issue I had was a "smoked and burned" wire from the starter solenoid to the ammeter.  My ammeter lost its insulation around the combination mounting posts/wire terminals.  That was ugly, so I knew how you were feeling, but the wires that fried were different from your experience.

The new throw out bearing needed to be "packed" with grease.  After the fact, I learned from Oilleaker that he will always pack a new throw out.  I just didn't think a new bearing needed this effort.  Ya Live...Ya Learn. ::)

Tim 
2-1949 CJ3As
1-1946 CJ2A

Offline aboyandhisdog

  • Flatfender Master
  • *****
  • Posts: 760
  • Karma: +0/-1
    • View Profile
Re: Mini Project on ODie
« Reply #22 on: August 10, 2015, 04:06:11 PM »
Well, that Mr. Leaker is one crafty fellow!

You should bring Whitey to the FCT.  Give her a taste of what the future holds.

I'm putting in one of those mini racing starters right now - just came in the mail.  It's about as big as a grapefruit, crazy!
Tom


Offline Oilleaker1

  • Willys Guru
  • ****
  • Posts: 201
  • Karma: +1/-0
  • Automotive Archeology/ Jeep Disease, Green Diseas
    • View Profile
Re: Mini Project on ODie
« Reply #23 on: August 10, 2015, 05:07:55 PM »
If all goes well in Dillon with "Or" my '51 M38 you saw sitting in the garage, I'm breaking him in good at the FCT. I didn't build him to just sit and collect dust. He drives like a brand new sofa sleeper. Might be too easy huh? Oilly

Offline jpet

  • Flatfender Enthusiast
  • ***
  • Posts: 101
  • Karma: +0/-0
    • View Profile
Re: Mini Project on ODie
« Reply #24 on: August 22, 2015, 09:59:13 PM »
Congrats on the success. I know that leak was frustrating for you in SD. Working on them can be fun, but not so much when you are going back in and redoing something you already did :S. Driving them is more fun :). Cya in CO.
CJ2A #29110 "General Willys" MB #204827 "BAM BAM"

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Mini Project on ODie
« Reply #25 on: August 23, 2015, 08:48:24 PM »
Thanks Jpet.  I appreciate it.

That is the rub.  Working hard to solve a problem, but still coming up short.  I just remind myself that the failures are all learning experiences.

See ya soon!

Tim
2-1949 CJ3As
1-1946 CJ2A

Offline RICKG

  • Willys Guru
  • ****
  • Posts: 265
  • Karma: +0/-0
  • I never met a mule i didn't like.
    • View Profile
Re: Mini Project on ODie
« Reply #26 on: August 24, 2015, 03:04:12 PM »
Quote
I just remind myself that the failures are all learning experiences.

See ya soon!

Tim
Your mindset is incredible Tim.. Me I cuss a lot then blame the Dog! see ya @ FCT.
OD MULE MC51986

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Mini Project on ODie
« Reply #27 on: August 24, 2015, 08:56:31 PM »
Quote
Quote
I just remind myself that the failures are all learning experiences.

See ya soon!

Tim
Your mindset is incredible Tim.. Me I cuss a lot then blame the Dog! see ya @ FCT.

Laughed out loud Rick! ;D
2-1949 CJ3As
1-1946 CJ2A

Offline BMIC

  • Willys Guru
  • ****
  • Posts: 406
  • Karma: +0/-0
  • Weekend Mechanic
    • View Profile
Re: Mini Project on ODie
« Reply #28 on: August 26, 2015, 10:03:17 AM »
One of my favorite Churchill quotes, "Success consists of going from failure to failure without loss of enthusiasm". Keep the ball rolling Tim....
We are masters of the unsaid words, but slaves of those we let slip out... WC

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Mini Project on ODie
« Reply #29 on: August 26, 2015, 06:43:58 PM »
Excellent quote.  :)
2-1949 CJ3As
1-1946 CJ2A