The CJ3A Page CJ3B.info

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - DaveG

Pages: [1] 2
1
"Original"-- Technical Questions, Answers, Observations / 24 Volt stuff
« on: September 03, 2013, 09:55:02 PM »
Hey Guys,

This question is about my M38 and not a 3a.  Sorry if it does not fit but there just seems to be a lot of good knowledge here.

I am looking to return my M38 to it's original 24 volt system.  I have just started looking locally and have found a starter and a distributor.  They want $100 for the starter and $75 for the distributor.  There is no wiring of any kind included.  Are these fair prices?  Any better ideas on where to come up with the whole thing or make some of the pieces?

Thanks,

Dave

2
Once You've Joined / Re: Hello from Colorado
« on: September 05, 2013, 10:45:13 PM »
OK, been doing more research.  Near as I can tell the frame number was made in 1945.  If that is the case, the engine in it could be original as it shows being a transitional casting. 

Any different opinions or anybody want to tell me what I am looking at wrong?   ;)   

Thanks,

Dave

3
Once You've Joined / Re: Hello from Colorado
« on: September 05, 2013, 07:56:21 PM »
Thanks Paul.  Found some good info there.  The numbers on the block and head indicate that it was a transitional engine that comes up 2a. 

I also found the tag on the inside of the left front frame rail.  It shows number 449021.

Additionally on the body bolster on the firewall near the steering column there is a stamped number.  247830  Any chance that was the hood number?

Thanks,

Dave

4
Once You've Joined / Re: Hello from Colorado
« on: September 05, 2013, 06:14:45 PM »
Well my trusty wire brush found the numbers on the engine.  They are near the bottom on the right hand side.  They are...

1-26   641087-L-W10  A  N  R-N2

Do these numbers mean anything to anyone?

Thanks,

Dave

5
Once You've Joined / Re: Hello from Colorado
« on: September 05, 2013, 05:57:36 PM »
Couple more pics.

6
Once You've Joined / Re: Hello from Colorado
« on: September 05, 2013, 05:48:11 PM »
Quote
The plate mentioned on the frame crossmember....

is a machine gun mounting plate...and if you look at the rear floor right where it comes up between the front seats you will notice an area in the front floor seam that has a rounded protrusion tha ta ten inch or so circle would match.� If you complete the circle on the floor directly below it you will find a crossmember with a bracket on it that is welded to the top of the crossmember directly under the floor. That is where a machine gun mount similar to what you might have seen in Rat Patrol reruns would bolt to the floor. That would verify a WWII frame, as would the front bellcrank mount being on the front axle instead of the bottom of the radiator crossmember. :)

I got a better look under the Jeep today and it does have the machine gun mount plate.   ;D

Did a little sanding on the hood but have not had any luck finding numbers.  Went to metal in a few places without ever seeing any white or light blue.  I have heard of using a propane torch to burn layers off.  Opinions?  Advice?

Thanks,

Dave

7
Once You've Joined / Re: Hello from Colorado
« on: September 05, 2013, 04:21:15 PM »
Quote
Hi Paul.
(I think we just highjacked Dave's post :) ;D Hopefully he doesn't mind.)


Not in the least.  I am learning all the time.

8
Once You've Joined / Re: Hello from Colorado
« on: September 05, 2013, 12:23:00 PM »
Quote
Have you made any changes in your decision on what your going to do with the MB?

Thanks Brett.

I don't know for sure.  If I had any sense at all I would sell the MB and concentrate on the M38.  Hard for me to let any Jeep go though.  If I had unlimited funds and time I would definitely restore them both but I don't have either.


9
Once You've Joined / Re: Hello from Colorado
« on: August 29, 2013, 02:07:12 PM »
Just had one of those exciting moments.  I was checking for numbers in the engine compartment and decided to try and turn the engine.  Just grabbing the fan I was able to turn it even though it had not moved in over 32 years.

10
Once You've Joined / Re: Hello from Colorado
« on: August 29, 2013, 01:49:34 PM »
Man that really does look like my kinda thing!  If I am still in the area I will try to make it.  Often I have to be away at work by then. 

Here are a couple more pics.  Is the hole in the bumper for a hand crank?

11
Once You've Joined / Re: Hello from Colorado
« on: August 29, 2013, 12:25:05 PM »
Quote
Welcome Dave and thanks for the pictures, the first picture is now my desk top back ground.....


Thanks for the welcome.  I guess that pic does kinda tell us that they are still out there.

12
Once You've Joined / Re: Hello from Colorado
« on: August 29, 2013, 11:39:56 AM »
Hey Guys,

That is some really cool info!!  Got me all excited now.  I will get out there later today and see what other info I can get off it.  Maybe get that stereo off the dash and get a look at the id plates underneath it.

Thanks for educating me and keep it coming.

Dave

BTW- What is a Buena Vista next month?

13
Once You've Joined / Re: Hello from Colorado
« on: August 28, 2013, 06:24:33 PM »
Yeh Bruce, pretty much opposite ends of the state.

Tim, I don't doubt you.  My knowledge about these years is extremely limited.  Here is the number on the frame...
25407-02-278
014-N6502

I have not found any other numbers yet.

The frame support under the radiator is tubular.  I did not see a plate on a rear crossmember but did not crawl under it.  The seats appear to be correct for the tub as everything matches perfectly with the fuel tank. 

I was told that the only difference between the 3a and M38 windshield frames was a couple brackets and slightly different wiper motors.  Was that incorrect?

Not trying to be argumentative, really.  I do want to learn more about these.  Here are some more pics.  Hopefully they will help.

Thanks,

Dave


14
Once You've Joined / Re: Hello from Colorado
« on: August 28, 2013, 03:12:17 PM »
Thanks for the welcome.

Yes, they were a package deal.  I found these about 10 miles from home out behind a barn.  They were inherited and had sat there for 32 years.  The both ran when parked but I have not tried them yet.  Having been in our fairly dry climate they really have very little rust.  The 3a does have some below the door on the tub.  On the M38 the windshield frame is pretty rough.  Really good candidates though. 


15
Once You've Joined / Re: Hello from Colorado
« on: August 28, 2013, 12:11:35 PM »
Quote
� �Hello Dave, and Welcome! In what part of Colorful Colorado are you located?� BW

I live near Del Norte about 50 miles from New Mexico.

Pages: [1] 2