The CJ3A Page CJ3B.info

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - racer 1

Pages: [1] 2
1
Hang on tight when you get back on the road with her!  An old racers rule used to be the faster you go the more brakes you need!
Your machine must have been pretty fast!!!!! ;)

 Dan  

2
"Original"-- Technical Questions, Answers, Observations / Re: Tires!
« on: August 25, 2012, 07:07:35 AM »
Thanks guys! �I'll look for a better set of 235's for now! ;)

 ï¿½Dan

3
"Original"-- Technical Questions, Answers, Observations / Tires!
« on: August 24, 2012, 10:12:50 PM »
Saving our pennies for a set of those really cool military style tires the flat fenders are known for.  In the mean time we tossed on some 235/75/15 to get her on the road.  She came with a set of cracked up 700/15 bias plys.  With the radials we get some nasty tire shake at 40-45 MPH.

The old tires don't shake a bit?  Wish I could trust them, but I don't!  Had the radials balanced with no change?  A buddy at work says that the old shocks won't like the radial tires.  Anyone hear of this????


  Dan

4
Thanks All!  Figured Bob would be the guy on this one.  ;)

 Dan  

5
Here's how it appears on the title:

 ï¿½ �451GBJ1 5983

Not sure how the Tag should look? � 451-GBJ �15983 �?

The J doesn't make any sense to me from what I've seen here. � �Does the Truck or Wagon have a J listed like that?

 Normally it would be 451-GB1 � �xxxxx �by all the lists?

Any thoughts Bob?

 ï¿½ �Dan

6
Tim,

 Thanks for the photos!  I knew about the numbering deal but wasn't sure about the engraving with the 51 series.   My title says 451-GBJ1-xxxxx    Not sure why the title has the J listed in the second series?

  Maybe our experts can clue me in?  Maybe titled off the original engine #????

  Dan

7
Can anyone send me a photo of their 51 ID Plate. �My 50 only has �CJ-3A followed by the serial number.

Guessing the larger 51 tag# is layed out a bit different. �

Thanks

 ï¿½Dan � derikson@wi.rr.com �;)

8
Wish mine looked like that!!!  Awesome work.  Very inspiring!

  Dan

9
Rambling, Malarky, Rants, Etc... / Re: Vacuum assist Brakes?
« on: March 13, 2012, 01:29:30 PM »
Vacuum assist Brakes, not so much. �After diggin in a bit deeper I found a pair of what looked like electrical stud terminals? �No wires attached though. �When I finally took the seat out, laid on my back and wiggled under the dash I found a steel name tag. �"Warner Electric Brake" Kinda cool, but not going back in the system!
Got our parts from Walck's last week. All new Hydraulic brake system from Master to wheel cylinders. �Now its time for some lights. �Someone has added a 12 V alternater but haven't verified if everything has been changed over. �Gotta start tracing wires and see were it all goes. �Found the drawing on this site so it should be close I would guess. �Did see another curiosity. I've got a knob and cable in the dash that leads out to a large round switch of some sort. I'm thinking it may have been something for the plow setup? �We gave it a tug and got one supper bright front marker light. Flipped it off thinking it was looking for 6v? �Its got a half dozen cloth wires terminated on it.

 ï¿½What do ya think? �http://i1255.photobucket.com/albums/hh625/DanErikson/PICT0407.jpg

 Dan                                

10
Rambling, Malarky, Rants, Etc... / Re: Vacuum assist Brakes?
« on: February 25, 2012, 08:59:17 AM »
Nope,

 Last sign of movement was a chalk marking on the radiator shroud from 93.  The master was empty and upon filling it the fluid never moves. We stripped the brake system out of it and found the lines were full of junk anyway.  I'm with you though, this deal on the master looks kinda funny.
I'm headed  out on a short vacation today but when I get back Tuesday evening I'll snap some pics.
I'm assuming the pressure switch added just passed the lines going out is for the brake light?

  Dan   :-/

11
Rambling, Malarky, Rants, Etc... / Vacuum assist Brakes?
« on: February 25, 2012, 12:21:24 AM »
Gentlemen,
 
 ï¿½While trying to remove the Master cylinder we found a surprise. �Found the brass Y fitting with the front and rear brake lines, then a tee fitting with a steel line heading through the fire wall and then the switch. �The steel hose runs to an under dash round cannister which has another line that runs back to the motor. �I can only surmise that this is added for some vacuum? �Maybe to help release the wheel cylinders more quickly?

What am I looking at guys?

 ï¿½Dan

12
Rambling, Malarky, Rants, Etc... / Re: Title service?
« on: March 05, 2012, 06:20:05 PM »
Hows Iowa?

13
Rambling, Malarky, Rants, Etc... / Title service?
« on: March 05, 2012, 01:37:31 PM »
Does anyone have any experiance with the online title services that are availible.  I'm looking at ITS out of Las Vegas.  International Title Service.  They tell me for $400 I get a title and plate? Sound like a scam?
 
  When a found my new friend I didn't think I would be takin her down the road but as I find more and more fuctioning drive train the need for a proper title has become a sticking point.  I'd hate to part it out.  

  Here's my tag: CJ-3A  54148   Engine:  3J 53455

I've tried the national title search with # 54148  but it comes back empty.  It was possible that in 51 ID# 54148 was used a second time?  Could this one have been titled under 53455?

 I'd love to find the last titled owner but running into road blocks on that path.

 Penny for your thoughts guys!

 Dan

    

14
Rambling, Malarky, Rants, Etc... / Re: You guys shoulda said something.....
« on: February 23, 2012, 11:35:16 PM »
The resto saga continues!

 ï¿½Well, she runs! Next step,lets go for some gears. �Sonny boy stepped on the clutch pedal but all he could get was some grind. �Ouch! Hate that sound. �Called it a day. �Chatted with a few buddies at work and we all agreed the pressure plate must be stuck on the flywheel. Gotta pop it some how. �Before we parked it against the nearest tree we decided just try rocking it. �Sonny boy #2 was home from college so he jumped in put it in gear and stepped on the clutch. My mechanic trainee and I started pushin and pullin, SNAP and she rolled free!! �Fire it up! �She moved in all gears and the trans feels nice and tight. �Clutch felt pretty good too with plenty of pedal. �Everybody took a turn makin the 8' trip back and forth in the garage. �Found one issue though, NO BRAKES. � The next day we thought it was time for the 100' trip back and forth down the driveway. Turned out she works in both high and low ranges. �Back to the garage to the jack stands to test the 4WD! �All worked well.

 Now she �sits on the stands with all the hubs pulled and brakes stripped out of her. Shoes had a bunch of meat on them so we left them hang.

 Now we're waiting for the tax return to replace all the hydraulic parts of the brake system. �Got all the parts already on the wish list!

Thank goodness for all the stash some cash ideas you guys have perfected!

 ï¿½Dan

15
Rambling, Malarky, Rants, Etc... / Re: You guys shoulda said something.....
« on: February 23, 2012, 01:40:46 PM »
Amen brother!!!!!!!!! �

 ï¿½I picked it up at the local bone yard sittin out by the road. By rights she should be a parts doner but I have a vision!!! Don't we all? �Rusty as all get out, Brand new looking goodyears if you ignore all the weathered cracks. Came with a plow minus any way to lift it. Plow frame is still under my little cutie.
Even has what I've searched to be a Koenig Cab. It stops just behind the seats not the all the way to the tail gate version. �

First evening home was a real treat. My 19yr old son was at his auto tech class so I started without him. Soaked the head with WD around the plugs didn't even give it a try the way they looked. Been there-Done that. �checked the dip stick and was surprised to find a fresh batch of nice clear oil. Gulp! Why would this be? Found 93 chaulked on the radiator shroud. Last oil change me thinks. Tossed in a 12 volt battery. Then a toggle switch with resistor to the coil. About then sonny boy rolled in from school. Time to turn it over! �Pulled the plugs, all snapped loose just like I planned. Layed them on the head to see about spark. Had junior give it a shot with the foot pedal and it turned over like nobodys business! �No Spark though. Pulled the cap which looked good inside and made my way to the points. Didn't think the green stuff was factory so I scratched them clean with my pocket knife and gapped them as best as I could remember a match book thickness. Still no spark, Put them back in to see how she would turn over with compression and tossed a little fuel down the carb for good measure. Much to our surprise she fired! �Original fuel pump had been abandoned and an electric pump had been added but nolonger functioned. �Can anyone say gravity feed!!!!!!!! Put the can on the radiator and sucked some fuel to the carb. Still cant believe it ran. �warmed it up a bit and then started pushin in the choke. It idled down and purd like a kitten. � STill at half choke so I'm guessin the idle circuit will need some attension! �What a riot, were hooked!!!!!!!!!!!!!

http://s1255.photobucket.com/albums/hh625/DanErikson/?action=view&current=Willy3.jpg
 

Pages: [1] 2