The CJ3A Page CJ3B.info

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dluyk

Pages: [1] 2 3
1
Thank you so much for the help. At one time I had the
manual downloaded - where it went - who knows. Your tips are so helpful.
Can't than you enough.

2
This screw holds the front fenders to the frame. I've looked on line, but
don't know what to call it in my search. I need to replace them, but don't even know where to start.
I sure could use your help on this - and thanks in advance.

3
Gearboxes and axles / Re: Fixing a broken mount near transfer case
« on: June 28, 2020, 06:41:31 PM »
Old Time, thanks for your post, (keep in mind I not a mechanic) what do you mean
replace the front bearing cap? I'm easily confused and spent some time looking at
photo's of front bearing caps and wonder why possibly replacing it. So instead of
looking at photo's - then looking at mine and scratching my head in wonder.....I thought I'd ask
someone with more knowledge.
 

4
Gearboxes and axles / Re: Fixing a broken mount near transfer case
« on: June 27, 2020, 10:08:30 PM »
After a closer look, it looks like the skid plate took a hit just about where the skid plate and cross member
intersect. It doesn't appear the cross member is bent. I will reach out to Harry and see what he has. Thanks for
the lead. Hate to have it welding only to have to replace it after the box is back on.
 

5
Gearboxes and axles / Fixing a broken mount near transfer case
« on: June 27, 2020, 07:10:01 PM »
Hi guys, just took off the body off of the frame of my 53 CJ3A and discovered this cracked transfer case/front output/gear shift housing.

What are the options on fixing this? Replacing the transfer case or replacing the cover? I'm guessing welding may not be a good idea.
Sorry about the photo size.

Thanks!


Images:




6
Thank you for the info. I did find the missing bearing so I have what I need. Now the struggle is getting the
steering gear arm off the sector shaft. I was able to get 1 of the fender bolts off. PB Blaster is a wonderful thing.

You guys/gals have no idea how helpful you are when you pass on your tips and knowledge. It's so helpful.

7
I have a couple of questions..#1 I've removed the fenders from the frame - in doing so the bolts snapped. Does this mean
I have to drill out the remaining bolts. I can't tell from feeling around inside the frame how to remove them. Both sides snapped.

#2 Just curious how many bearings should their be in Ross steering box. When I opened it up the lower bearings came lose. I was
careful and don't think I lost any - but there appears to be a gap that could hold 1 more bearing. I have 9 - should there be 10 or
is the gap allowing for better movement?

8
Hello all, we are in the beginning stages of a 1953 CJ3A restoration, still planning..

We have toyed with the idea of having the engine rebuilt. We just did a compression test on the ol' girl and here are the results:

Dry: #1: 110, #2: 115, #3: 115, #4: 110
Wet: #1: 115, #2: 120, #3: 120, #4: 120

The engine seems to run fine but we have an air/fuel mixture issue we havn't figured out. It seems to run rich.

The question we have for you is this: do those compression numbers seem healthy to you? We recognize that we will never have a better opportunity to rebuild the engine, but we're not interested in spending extra time and money on an engine rebuild especially if it's not really necessary. Original odometer read just over 62k miles.

9
Thanks for your insight. A little squirt of PB blaster and out it came. Thanks all. So far the tear down is coming along. Front grill/fenders off, wire harness out - in the next few days the hood, windshield, seats, gas tank are all coming off. Just a few snapped bolts, but otherwise still having fun.

10
It feels like it wants to come out..but I pull it about 1/2 inch from the engine block and gives me resistance..almost like theirs a spring catching (just a description). I would say this is an original part.

11
Well I'd rather wrap Christmas gifts then remove a wiring harness. I have it all removed and the gauges out except the Temperature gauge. My question is this...how do I disconnect the gauge from the engine. I've removed the small square nut - but before I tug and break anything....do I need to remove the nut attached to the engine block. Cuz I've tried to remove that bolt and she ain't budging.  Thanks for your insight.

12
"Original"-- Technical Questions, Answers, Observations / Replacing Shocks
« on: September 23, 2015, 07:13:47 PM »
I'm going to replace the old shocks on the CJ - any suggestions on brands and tips and things not to do?


Thanks.

13
Well where do I start? Rewired the Willy's, getting the generator rebuilt and was looking to enjoy some rides in the Adirondacks this summer. Better checked the rear differential. It was a bit low so we topped it off. Now I have a nice puddle to soak up. I did not drive it after filling the differential. Seems I'm spending more time under it then in it.� I hope this is just a bad seal. The leak is just behind the drive shaft/U-joint. Is this an easy fix or best taken in? Your thoughts ( and prayers) would be appreciated. On another note, love the new look of the forum.�

14
Thanks for the info - I'll pull it tomorrow and have a look. I did use Bob W.'s info today to test the gen.
In fact I have it printed and was following the step by step instructions.  Can't tell you how helpful I find
this forum and it's great to have you share you knowledge with us rookies.  :)

15
I have an Auto-lite 6001D generator that doesn't seem to be working. It's a type A.
Before I take it in for service - what would you suggest? Do I replace the brushes and see if this does the trick. Or should
I bite the bullet and just take it in for service? the Willy's starts and I can drive it, but it's draining the battery and the ampmeter shows
it's discharging. I look forward to your words of wisdom and insight.

Thank you

Pages: [1] 2 3