The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: JeffH
« on: March 08, 2020, 07:16:41 AM »

Sorry for the delay, I do not have any production numbers or dates. I am always looking and lurking on a bunch of forums for more info. I do know that Warn bought Belleview MFG then offered the same winch for sale with their tags model numbers on it.
Posted by: tow hook
« on: February 12, 2020, 10:25:48 AM »

awesome, i have bellview / warn ( model 6000) as well, it has the red/metal tag must be newer then yours. do you know the years they were made ? i've been trying to date mine for a while.       
Posted by: oldtime
« on: January 20, 2020, 10:24:58 AM »

Looks like the drum easily handles 150" of the 5/16" cable.
Posted by: JeffH
« on: January 19, 2020, 03:00:40 PM »

Spooled up the 150' 5/16 that came on the winch when purchased, I swapped ends and cut off about 6' to remove a kink and frayed area. Been researching a heavy duty continous duty solenoid to replace the blade switch that powers the winch through the 3rd push pull cable.  I ordered a 500 amp NVX solenoid and went to Napa for the other two control cables and a push button switch to power the switch when needed. Still need the battery cables to supply power, going to use 2/0 sized cables. Winch operates great with only a jumper cable installed on motor to spool the cable.

Posted by: JeffH
« on: January 13, 2020, 04:49:16 PM »

Here's the just got it home pic! Can't believe it was just a few miles down the road from my home in Gawja, best $75 purchase I've made other than beer LOL
Posted by: oldtime
« on: January 12, 2020, 02:24:14 PM »

Cool Bellview set up !
Posted by: JeffH
« on: January 11, 2020, 06:32:52 PM »

It's been a long road but I finally got my rebuilt Belleview winch installed on my CJ3B. I originally installed the winch with the bumper in the original location but found the lever to engage the winch was too close to the grill to operate.  So I added spacer blocks to move it forward 1". I beefed up the orig bumper mounting to handle the winch. Still need to buy/install the winch controls and wind the removed cable back onto the winch.