The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: GregC
« on: January 18, 2016, 07:47:46 PM »

If I had read the whole questions and answers section on the Kaiser's product description, I would have answered my own question.  Thanks for the help!
Posted by: GregC
« on: January 18, 2016, 07:40:09 PM »

Does the thermostat go in the housing before or after the retainer?
Posted by: Austin
« on: January 18, 2016, 06:49:38 PM »

This is what you will need.  I tore apart one L134 awhile back and there was some strange accordian looking thermostat in it. I haven't been able to find anything like it, but this will go with any typical thermostat you will find in a parts store.

http://www.kaiserwillys.com/product/221/willys-jeep-cooling-thermostats-parts-accessories
Posted by: GregC
« on: January 18, 2016, 06:04:39 PM »

I went to the part store today and got a new thermostat.  When I took the housing off (only broke two of the three bolts), I found the old thermostat was is two pieces.  I'm confused how the new style thermostat is going to be held in place.  Does anyone have photos of how it and the retainer go into the housing.  Thanks!