The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: James P
« on: June 11, 2014, 08:01:36 PM »

I have pictures of the disassemble of the starter over on my rebuild page but unfortunately, I failed to take pictures when I did the generator. I ended up using the Dupli-color engine paint in a semi gloss black.
Posted by: Kirkski
« on: June 11, 2014, 08:00:42 AM »

I would love to see any pics of the disassembly I am thinking about doing mine. I have a price of $75 each from a local armature shop, not sure of what I would be getting into�
Posted by: 1955CJ-5
« on: May 27, 2014, 09:38:27 PM »

I used Duplicolor engine paint.....so far I like it....I used it on the transmission, engine, starter/generator and the oil filter canister....so far so good..it's supposed to withstand 500* which might be a little optimistic...but it has withstood the oil and water spills...

Eastwood sells a two-part epoxy that has a special 2 part aerosol can...expensive though

As always two part auto paint with a hardener would probably be best if you have the equipment......
Posted by: Ryan_M
« on: May 27, 2014, 08:39:20 PM »

Quote
Thanks now just to figure out what type of paint to use. :)

I'm sure there will be more sophisticated solutions from other members but regular ol'  Rustoleum black has held up pretty well on mine so far.
Posted by: James P
« on: May 27, 2014, 08:18:22 PM »

Thanks now just to figure out what type of paint to use. :)
Posted by: Ryan_M
« on: May 27, 2014, 07:20:27 PM »

Here's an original one I took out of the box for the first time last year. Color is black.

Posted by: James P
« on: May 27, 2014, 07:00:54 PM »

Okay I have done the crazy and completely dissembled the generator and am in the process of rebuilding it and then will be moving on to the starter when I finish. Now I have hit a bit of a snag as I am working on this. What is the original color of the Auto-lite Generators? Also what type of paint do you use that can handle the heat but also will not come off if oil and water get on to the generator ( sorry it is a Jeep it will happen).
Yes pictures will come when I finish it.