Get a photo of you behind the wheel with a 3A shaft and tube, swap into the MB tube, take another photo, show the wife the photo, proclaiming you lost all that weight. "My dear wife...photos don't lie."
I can't wait to tell the little lady that I don't need to go on a diet, just need to install the wrong steering shaft! If that's seriously the only difference, all I'd need to do is wire it for the military horn button looks like I just bought myself some more... uh "leg room". Thanks guys
Early CJ2A (same as MB) with horn brush contact 40.5" Late CJ2A with horn wire out the bottom � � � � � � 41.5" CJ3A/M38 � � � � � � � � � � � � � � � � � � �42.5"
Military jeeps were designed for easy access, not comfort, so the shaft was designed with that in mind. As civilian production evolved the shaft was lengthened (CJ2A). When the CJ3A/M38 came out the rear inner fender wells were shortened to allow the seat to be moved back for more leg room. The shaft was again lengthened accordingly.
Why the difference in length between the military and civilian jeeps? Did GI's need more room for them with their gear on or where farmers just thinner back then? :-?
The turning radius is the same. The shaft is a different length, about 2 inches shorter than a CJ3A, and the horn wiring is different. The shorter shaft means the steering wheel will be farther away when driving.
Can someone tell me if the MB column and box is interchangeable with a civilian 3a? I've acquired a military one but not sure if the turning radius is the same. Call me old fashioned but I just can't leave the Chevy Impala column and box in that came with it. �;)