The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: TomJ
« on: January 14, 2012, 10:48:06 AM »

Yeah..that was it, tested the ground and that was the problem. Thanks for the tip and the link to the parking light, I've been all through that site but hadn't caught that part.  When the parts came from Willys it seemed like there had to be one part missing but I guess not.

Tom
Posted by: Jesse
« on: January 12, 2012, 10:45:54 PM »

Oh duh I just found the page I wanted


http://www.cj-3a.com/installing_front_turn_signals.htm



This one shows the light socket in better detail.

-Jesse
Posted by: Jesse
« on: January 12, 2012, 10:43:46 PM »

I was under the impression that the bulb holders were in the back and the bulb was inside the lens or something. I used an older grill with different lights but I think there is a photo here

  http://www.cj-3a.com/installing_an_optima_battery.htm

that shows it in the bottom right corner of the page. You can see the socket sticking out just below the headlight bucket. I thought there was a better photo but I couldn't find it offhand. Maybe this will help?
Posted by: Matto
« on: January 12, 2012, 02:55:39 PM »

Your right, I see that now. Thats's what happens when your too poor to pay attention. ;)
Posted by: Carls_jeep
« on: January 12, 2012, 01:01:28 PM »

No, he swapped the bulbs with the same effect.
Posted by: Matto
« on: January 12, 2012, 12:18:07 PM »

Do you have one 12 volt bulb in a 6 volt system?
Posted by: Carls_jeep
« on: January 12, 2012, 11:59:41 AM »

Yes, bad ground at the headlight plug wiring. The same is true of a dim light anywhere on a vehicle.
Posted by: p3ferris
« on: January 12, 2012, 11:09:06 AM »

You definately have a bad ground.  run a ground from the battery temporarly to see what I mean.
Posted by: TomJ
« on: January 12, 2012, 10:26:15 AM »

Hi all:
Getting pretty close to done (will try to get some pictures posted soon), but trying to deal with some final wiring issues.  In wiring up the headlights we get power to both but the right headlight comes on very dimly.  It's not the light itself as we switched them and same deal.  Anyone run into this issue and have any recommendations?  Also ordered the parts to assemble the parking lights, do the bulb fittings simply attach to the cup in the grill or is there a piece that goes into the recess that the bulb holders fit into?

Tom