Posted by: RussellL
« on: September 03, 2011, 06:20:29 PM »Like the other guys said, all starters need a big switch to connect them to the battery. Some have this switch mounted on the starter and it can be operated either by your foot or by a solenoid relay triggered by the key. Others have the relay switch mounted on the fender and only one big wire going to the starter. The starters that have the relay mounted on the starter usually use this same relay action to engage the drive gear with a big magnet or with power from your foot. The starters that have a separate relay use centrifugal action to engage the drive gear. If you have a relay on the fender, it will work the same as your diagram but the wire from the key to the starter goes to that relay on the fender instead.
