The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: RandyA
« on: August 13, 2011, 12:50:10 PM »

didnt get to the camera, but disassembled unit   and found out its a... Mobile products model 901 H....must be after market..although mounting bracket seems too be made for firewall bolt pattern...two fans and a pretty good sized heat exchanger on it...
Posted by: RandyA
« on: July 16, 2011, 02:36:37 AM »

Thanks all...when I get off this Tub I will try and post some pics...
Posted by: rocketeer
« on: July 13, 2011, 09:47:43 AM »

In order to post a pic it must be hosted someplace, like Photobucket.

Larry
Posted by: mud pie
« on: July 13, 2011, 09:36:45 AM »

Wow, my heater looks nothing like those...and I assumed it was OEM because it used the knock-outs on the passenger side of the body.  Mine has a control flap that let's you direct the heat to either the passengers feet or over to the drivers.  It's a square heating coil, maybe 8"x8" motor on top with a shroud covering it.  I'd attach a pic, but the steps needed to attach a pic are maddening...
Posted by: Matto
« on: July 12, 2011, 10:12:41 PM »

Here's a picture of the heater on the drivers side of my 54 3B. It has small doors on the front and sides that you open and close to control the heat.

Posted by: rocketeer
« on: July 12, 2011, 09:54:03 PM »

http://www.cj-2a.com/OEMparts/heaters/index.html

Larry
Posted by: athawk11
« on: July 12, 2011, 07:22:13 PM »

Hi Randy,

I know of the Harrison Heater, as it is the type that was installed in my Willys. �There have been others that are more square shaped. �The Harrison is shaped like a kidney I guess. �Below is a photo of mine. �It is disassembled and ready to be cleaned up. �This is a photo of the back side. �This was installed up under the dash on the passenger side.

Tim

Posted by: RandyA
« on: July 11, 2011, 10:33:15 PM »

does anyone out there have a picture of a heater??? How many different configurations are there? I just pulled mine out and it has dual fans on top of heat exchanger....with a expanded metal shroud over the top too stop debris from entering unit...mine was plumbed with what looked like old steam hose...threaded fittings on one side and hose bib on other....as always ,Thanks in advance....