The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: SteveZ
« on: February 18, 2014, 09:50:14 AM »

Thanks again. Sorry to be a PITA!
Posted by: F Bill
« on: February 18, 2014, 08:37:38 AM »

Quote
Not trying to get into a "lubrication" debate. But I've got a 5 gallon bucket of the Napa GL1.
So I have a clear understanding--- The GL1 goes into the Transmission & Transfer Cases but I'll need a straight 90W GL5 Hypoid Gear Oil for the Differentials correct?

Thanks again.

You've got it. The way I understand it and I'm no lubrication engineer, is we need the GL1 to avoid the damage a modern gear lube could do to the brass parts of our transmissions, but in the differentials the hypoid gears need a hypoid lube that will hold up under the extreme pressure between the ring and pinion. No brass in the Diff, so GL-5 is fine.

Sounds like you have a lifetime supply of GL 1.  :)
Posted by: SteveZ
« on: February 18, 2014, 07:18:09 AM »

Not trying to get into a "lubrication" debate. But I've got a 5 gallon bucket of the Napa GL1.
So I have a clear understanding--- The GL1 goes into the Transmission & Transfer Cases but I'll need a straight 90W GL5 Hypoid Gear Oil for the Differentials correct?

Thanks again.
Posted by: Quebec Jeep
« on: February 17, 2014, 04:40:20 PM »

Posted by: SteveZ
« on: February 16, 2014, 10:30:26 AM »

So, no GL1 Mineral Oil in the Diff's?

Posted by: athawk11
« on: February 11, 2014, 11:22:44 PM »

Here at the 3A, I believe you will find that the GL1 is the recommended choice for the tranny and transfer cases.� Believe it or not, 30w non detergent oil is also a good choice.

According to the manual, the right choice for the differentials is a 90w hypoid oil.� This would be any of the current GL5 extreme pressure hypoid gear oils available at all auto parts stores.

Tim
Posted by: garage gnome
« on: February 11, 2014, 09:29:59 PM »

Yeah, you should be fine. Thats what I use.
Posted by: SteveZ
« on: February 11, 2014, 08:24:40 AM »

I am going to PM my new to me 2A and want to change all the fluids in the transmission, transfer case and front/rear differentials.

I found this at NAPA - Gear Oil, GL-1 90 Gear Oil; 80w90

I've done a ton of reading and ended up more confused then when I started :o

Am I safe to use this in all of them?