The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: mtnman37879
« on: November 06, 2018, 07:53:55 PM »

Excellent idea!
Posted by: terryb
« on: November 05, 2018, 09:16:47 PM »

Thanks for the info and pictures but I decided not to go with the screws for fear of piercing the radiator.  I welded 4 L- brackets to the shroud with drilled holes and mounted it with the same bolts as the radiator
Posted by: 1955CJ-5
« on: October 28, 2018, 08:56:03 PM »

I measured mine once and took a couple pictures. They are short but I'd probably even dull the tip a little before installing....and be careful!
Posted by: Bob W
« on: October 28, 2018, 08:14:23 PM »

Originally they used very short sheet metal screws. Be careful, it is easy to damage the core tubes!!!!
Posted by: terryb
« on: October 28, 2018, 05:10:52 PM »

Hey gentleman,  I just received my radiator shroud from Walcks for my side mount radiator for my '51 3A. I'm having trouble figuring out how it mounts to the radiator. there are 3 small cutout slots on each side of the shroud looking like for small sheet metal screws, but i'm afraid they might pierce the radiator. has anyone installed one of these and how is it done?

Thanks guys for any and all info.....