Very nice Pascal.� There are many here that will suggest you leave it alone.� To each his own on that decision.
On mine, there seemed to be a clear coating of some kind that had deteriorated and developed the patina.� It required the removal of this coating to reveal the shiny brass.� I used a combination of 400 grit to 1500 grit wet/dry sand paper.� The label on the Fire Gun was also brass.� I carefully worked the sand paper on the label so I didn't remove the painted letters.� I was lucky that the paint was mostly recessed and the brass sat proud.� I don't know the make up of your label, so be gentle!� Once I got it clean, I shot it with a couple coats of new Clear Coat rattle can paint that I picked up at the auto parts store.
You do need to log in for it to appear. It will be up in the green band where the g503.com message is. I am auto logged so didn't know that but I logged out and it disappeared.
Yes there is a pretty good search function on the top right of the page, click on advanced search, then put in your keywords(s) not on the google line but on the forum line, skip author and all that stuff and pick the forum you want to search and stuff will pop up. You get the hang of it after a few times and learn to narrow down terms. It also helps to use the back arrow button as it will stay in the topic you are searching. Easier than my explanation is
Here is a link listing the fire extinquishers that were common for MBs and GPWs. According to the TM9-1799, there were quite a few manufacturers supplying them for Jeeps.
Here is where you have to be careful on things. The link mentioned above made reference to Pyrene being a supplier of FE's during WW2 however it appears they did not go into jeeps
The funny thing about the link Quebec jeep sent is that I have almost all the things that the jeep had before I got my jeep I sm judt midding a couple of little things