The CJ3A Page CJ3B.info

Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Write the word between words Jeep from this JeepWILLYSJeep?:
How many slot has a GPW grill?  7 - 9 - 11:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: 64CJ5
« on: February 27, 2019, 08:26:43 PM »

An excellent job.  I really like the paint job on the fan.
Keep the pictures coming.
Posted by: mtnman37879
« on: February 27, 2019, 07:39:26 PM »

I haven't posted in a while here's some more pictures of progress. The tub is Smoke Gray Rustoleum and a Harbor Freight HVLP gun. One run, I'm going to leave it and let people wounder how it got a horizontal run. Let it sit for a few days and on the frame she goes! Wiring next...
Posted by: mtnman37879
« on: May 29, 2018, 01:02:35 PM »

Working on the transfer case. Everything has been cleaned and inspected. All the threaded holes have been re-tapped. Case checked for cracks. Even the pilot bushing has been removed (PITA! had to cut it out cause the bread trick didn't work). Here's a few pictures, before and after. Waiting for parts to come in the mail. The transmission is next in line.
Posted by: athawk11
« on: May 24, 2018, 03:19:28 PM »

Quote
Who has the double lip seals?

Ron Fitzpatrick Jeep Parts.
Posted by: mtnman37879
« on: May 24, 2018, 01:34:33 PM »

Started tearing into the transfer case today. Doesn't look too bad but I'll replace all the bearings, shafts and thrust washers. I also pulled the trigger on a new Saturn overdrive. I bought it from Kaiser Willys. They had the best price, $1049.99 with a shifter kit and free shipping. Who has the double lip seals?
Posted by: mtnman37879
« on: May 11, 2018, 05:57:39 PM »

Coming right along! Axles are on the springs, 11" brakes are complete, front suspension is complete, shocks installed and the wheels are aligned. I bought the *crap bell crank repair parts from OMX. They were looser that what I took out. Sent them back for a refund. Spent $54 on a NOS repair kit from Obsolete Automotive Warehouse. It is a large bronze bushing and center bolt. Fits and feels like new! Ya get what ya pay for! I re-engineered the brake/clutch shaft. I made nylon washers that fit snug on the shaft to act as a grease seal. Made a bushing to fit between the brake pedal and clutch arm to replace the washer and cotter pin. then I made the anti-wobble bolt to hold it all together, feels like new! My Willys, just like most new cars now requires a 10mm wrench, the reproduction brake lines have US threads but the hex is 10mm. The transfer case and transmission are next...
Posted by: RICKG
« on: April 19, 2018, 03:11:44 PM »

Nice, you're gonna love the 11" brakes..
Posted by: mtnman37879
« on: April 19, 2018, 12:52:45 PM »

It's finally starting to look like a Jeep instead of a large pile of parts. The front and rear axles are installed!
Posted by: mtnman37879
« on: April 14, 2018, 12:26:00 PM »

Quote
Looks good.� I noticed the EP 140 gear oil in your photo.� Original spec calls for 90w.
Yep, that's what my Service Manual says too. I think they owned shares in the company that made 90w cause you pour it in constantly. The 140 stays put.
Posted by: athawk11
« on: April 14, 2018, 09:15:08 AM »

Looks good.  I noticed the EP 140 gear oil in your photo.  Original spec calls for 90w.
Posted by: mtnman37879
« on: April 14, 2018, 06:11:09 AM »

My front has Spicer axles so here's the tag.


Posted by: MGYs
« on: April 14, 2018, 02:21:24 AM »

Bendix tags
Posted by: MGYs
« on: April 14, 2018, 02:16:19 AM »

Thanks for sharing those pictures! You helped me in that I couldn't remember how the rear brake line T-fitting was installed, so I fabricated an L bracket. Then I saw your rear axle pic. Now I know where that piece I was holding in my hand the other day is supposed to go! [smiley=2vrolijk_08.gif]

Please let me return the favor (or possibly cause you grief, for which I apologize in advance). On my front axle, I had the following tags.
Posted by: mtnman37879
« on: April 13, 2018, 09:59:15 PM »

Got a bunch more work done. The axles are ready to install. Every bearing, and every seal have been replaced. All the clearances have been set, both front and rear gear sets are cutting almost perfectly. 11" brake backing plates installed. Painted and ready to hang under the frame.
Posted by: mtnman37879
« on: March 22, 2018, 05:17:21 PM »

Some assembly required! This is the front axle of my 1950 CJ3A. Every surface has been cleaned and inspected. Every hole has been tapped and every thread has been chased. The balls have been polished and everything that should be painted has been primed. The spindles have been re-bushed and the nuts have been renewed. The axles had oil seal wear grooves, those have been sleeved. The lockouts have been cleaned and the bearings will be replaced. Now for the assembly! Soon she'll be getting a paint job, the final step.