pass side head light wires / speedo cable

[tow hook]

I may be mistaken.  It's been a while now, but I found wire loom clips and old loom remnants along the lower edge of my 3A grille, so I asked Bob Westerman about that.  I believe he left me with the impression that all or part of the passenger side wires were down there.  Maybe it was just the park light wire...? Maybe I'm smokin' dope.    

EDIT::Okay, I found an original 2A grill picture posted by Ryan M over at the 2A page.  Scroll down a bit to see the 2A grill with the lower wire loom.  It was for the park light  wire only...

https://www.thecj2apage.com/forums/cable-clip-locations-etc_topic36740.html

At the time I was putting my green 3A together, I was thrown off by the Walck's wire harness containing both the headlight wires and the park light wires in a single loom, thus my question to Bob Westerman.

thanks, and yes my park light ( yellow ) wire comes off the head light loom like the org. on the pass side only

[tow hook]

I would guess that the "one size fits all" approach to making it easier for the seller might be a part of this.  I believe the CJ-3B does this (headlight/parking light in the same loom).  When I ordered mine - to include wiring for turn signals - I ended up with an additional loomed wire that barely fit under the harness clip meant to secure the headlight/parking light wires.

If the owner knows (I didn't know anything since my harness was just a mass of loose wires) what is needed or what is wanted, they can ask the seller to incorporate that need.  Then it'll be a beneficial conversation starter at the next Reunion when someone notices!!

thanks i tend to agree with that,  can't wait for a show next year

[tow hook]

I found some pictures taken before I took it apart.....

The picture with the wire circled is the passenger side.

 thanks , as soon as i have the right grommet i can put these lights in. erff..

 i'll post pics of my next delima as soon as i can up load them.

[tow hook]

awwa the grommets , the new ones are 1 1/8"  mine are just under 3/4" any thoughts walcks 4wd doesn't have them, kaiser has a 1/2" s and the one in the pics

https://www.mywillyspics.com/image/jgwTl
https://www.mywillyspics.com/image/jgF0k
https://www.mywillyspics.com/image/jgvPt
https://www.mywillyspics.com/image/jgOZp
https://www.mywillyspics.com/image/jgf6z

will i have to cut the old ones off ? trying to find them other places, maybe it a kaiser thing ?

[Rus Curtis]

tow hook,
I got my harness from Vintage Wiring (VW).  Theirs included a grommet that fit in a smaller hole (I just measured the outside of the grommet and it was .78").  I notice each of your wires have their own hole to pass through the grommet.  The VW grommet had one big hole for the loom that encased the wires.

Looks like this one:
https://www.kaiserwillys.com/headlight-bucket-wiring-grommet-fits-46-71-jeep-willys

I'd call to verify size though.

[tow hook]

tow hook,
I got my harness from Vintage Wiring (VW).  Theirs included a grommet that fit in a smaller hole (I just measured the outside of the grommet and it was .78").  I notice each of your wires have their own hole to pass through the grommet.  The VW grommet had one big hole for the loom that encased the wires.

Looks like this one:
https://www.kaiserwillys.com/headlight-bucket-wiring-grommet-fits-46-71-jeep-willys

I'd call to verify size though.

thanks, and that grommet works for me. there is a local place that i sent a email to i'll see what they have as well. 

[tow hook]

thanks for help, i got grommets local at restoration specialties https://www.restorationspecialties.com/  there were ten mins from  work, a co worker told me of them.... i  got the grommets and harness tie down straps all for under a buck for each item. they don't have much for us guys but they had enough to be help full

 thanks for the help